Hayati Pro Max Plus Pods

Hayati Pro Max Plus Pods are the official replacement pod packs for the Hayati Pro Max Plus 6000 rechargeable device — no device included. 75 flavours, each pack containing a 2ml prefilled pod with an integrated 1.2Ω advanced dual mesh coil and a 10ml auto-refill container — 12ml of Hayati e-liquid in total (nicotine salt in 5mg, 10mg, and 20mg; nicotine-free in 0mg) — delivering up to 6,000 puffs (usage dependent). MTL, inhale activated. Hayati Pro Max Plus 6000 only. Available in a 3 for £15 bundle. Browse the full Hayati range at Vapourcore.

Hayati Pro Max Plus 6000 Pods: 1x 2ml prefilled pod (1.2Ω advanced dual mesh coil integrated) + 1x 10ml auto-refill container = 12ml total, up to 6,000 puffs (usage dependent), 0mg / 5mg / 10mg / 20mg, MTL, inhale activated, magnetic push fit connection. Replacement pod packs — Hayati Pro Max Plus 6000 device required.

The Hayati Pro Max Plus System — 2ml Pod, 10ml Container, Magnetic Push Fit

The Hayati Pro Max Plus 6000 pod system uses two components that connect before being inserted into the device as a single unit. The 2ml prefilled pod holds the integrated 1.2Ω advanced dual mesh coil and the e-liquid that feeds the coil directly. The 10ml auto-refill container holds the main e-liquid reservoir. The two connect through a magnetic push fit — the components align and click together securely before the combined unit slides into the rechargeable Hayati device.

Once installed, the 10ml container feeds the 2ml pod automatically throughout the pod's lifespan. No manual topping up, no refilling, no coil changes — replace the whole pack when it is done. The magnetic push fit connection is designed to create a secure seal designed to minimise leakage between the pod and its reservoir. Replace when flavour intensity noticeably drops and vapour production weakens — both signals together indicate the pack is nearing empty. Do not replace based on the container appearing empty alone. Browse compatible prefilled pod vape kits at Vapourcore.

1.2Ω Advanced Dual Mesh Coil — Consistent Flavour Throughout

Every Hayati Pro Max Plus 6000 pod contains an integrated 1.2Ω advanced dual mesh coil. The 1.2Ω resistance is optimised for MTL vaping — producing a tight, controlled draw that delivers smooth vapour at each of the four available strengths.

The dual mesh design uses two coil elements heating simultaneously across a wider surface area than a standard single-coil design. This is designed to help deliver more even, consistent flavour across the pod's lifespan — not just the first few hundred puffs, but throughout the full 6,000-puff pack (usage dependent). A fresh 1.2Ω dual mesh coil comes integrated into every replacement pod — no separate coil purchases, no coil fitting. The coil is already built in. Browse compatible Hayati Pro Max e-liquid at Vapourcore for refillable kit alternatives.

Nicotine Strength Options (Availability Varies by Flavour)

Hayati Pro Max Plus 6000 pods are available in four nicotine options. 20mg is available across the full flavour range. A selection of flavours is also available in 10mg, 5mg, and 0mg — check the individual flavour page for strength availability before ordering.

• 0mg (nicotine-free): 25+ flavours available. The full Hayati Pro Max Plus flavour experience without any nicotine. For vapers who want the familiar draw and vapour without nicotine intake. The 0mg option is nicotine-free — not a nicotine salt strength.
• 5mg: 20 flavours available. A lower-strength nicotine salt option suited to frequent vapers who want less nicotine per draw, or those reducing their nicotine intake over time.
• 10mg: 29 flavours available. The mid-strength nicotine salt option, suited to regular vapers who have stepped down from 20mg and want a moderate nicotine level per draw.
• 20mg: available across the full flavour range. The highest available strength nicotine salt, suited to adult smokers switching to vaping or those moving from disposable bar vapes who want fast, smooth nicotine satisfaction.

Shop by Nicotine Strength

If you already know your preferred strength, browse the dedicated collections below. Strength availability varies by flavour — confirm on the individual product page before ordering.

• Browse the 10mg range
• Browse the 5mg range
• Browse the 0mg nicotine-free range

75 Flavours — Fruit, Icy, Candy, Menthol and Tobacco

75 flavours spanning fruit, icy fruit, soda and drinks, candy and sweet, menthol and mint, and tobacco. All 75 are available in 20mg. A selection of flavours is available in 10mg, 5mg, and 0mg — each individual flavour page shows which strengths are in stock. Every flavour below links to its own dedicated product page at Vapourcore.

All 75 Hayati Pro Max Plus Pod Flavours

All 75 flavours use the same 1.2Ω advanced dual mesh coil, 2ml+10ml=12ml magnetic push fit system, and up to 6,000-puff estimate (usage dependent). Click any flavour for the full product page.

Fruit

• Blueberry Raspberry — Soft honeyed blueberry and bright tangy raspberry — clean and balanced.
• Blueberry Pomegranate — Sweet blueberry richness with tart, exotic pomegranate depth.
• Cherry Berry — Ripe cherry sweetness wrapped in mixed berry warmth.
• Double Apple — Crisp green apple and sweeter red apple — both distinct in the same draw.
• Fruit Twist — A vibrant medley of mixed fruits — surprising and vivid from every draw.
• Grape Berry — Vivid candy-grape sweetness fused with a mixed berry warmth.
• Juicy Peach — Warm, ripe peach at its most natural — soft, sweet, no ice.
• Peach Aura — A softer, more floral peach profile with a warm, dreamy finish.
• Strawberry Cranberry Cherry — Sweet strawberry with cherry richness and tart cranberry to sharpen.
• Strawberry Kiwi — Ripe strawberry sweetness and tart exotic kiwi — fresh and balanced.
• Strawberry Raspberry Blueberry — Three red and blue berries in one draw — sweet, sharp, and fruited.
• Strawberry Raspberry Cherry — Sweet strawberry, tangy raspberry, and deep cherry layered together.
• Strawberry Watermelon — Candy-sweet strawberry and fresh, light watermelon — a summer pairing.
• Summer Dream — A bright mixed-fruit profile evoking warm-weather sweetness.
• Triple Mango — Three layers of concentrated tropical mango — bold, warm, no ice.
• White Peach Raspberry — Delicate white peach softness brightened by vivid raspberry tang.
• Mango Peach Pineapple — Tropical mango, juicy peach, and tart pineapple fused into one.
• Sunset Aura — Warm tropical fruit and sweet berry in a soft, summery blend.

Icy Fruit

• Banana Ice — Creamy warm banana with a sharp icy blast — warm fruit, cold close.
• Blackberry Ice — Bold dark blackberry with a crisp, clean icy finish.
• Blackberry Raspberry — Dark blackberry depth and vivid raspberry tartness — bold and icy.
• Blueberry Cherry Cranberry — Sweet blueberry, ripe cherry, and sharp cranberry chilled together.
• Blueberry Raspberry Cherry — Three dark berries — blueberry, raspberry, cherry — with an icy close.
• Cherry Peach Lemon — Ripe cherry, warm peach, and zesty lemon — a sweet-tart icy trio.
• Ice Pop — Nostalgic frozen fruit sweetness with a cool, refreshing close.
• Lemon Pineapple — Sharp citrus lemon and tart tropical pineapple with an icy blast.
• Pineapple Ice — Vivid tart pineapple simultaneously refreshed by a punchy icy blast.
• Red Apple Ice — Warm sweet red apple with a clean, crisp icy close.
• Smooth Strawberry Ice — Smooth, ripe strawberry with a gentle, refined icy finish.
• Strawberry Raspberry Ice — Sweet strawberry and sharp raspberry chilled by a crisp ice blast.
• Watermelon Ice — Light, fresh watermelon with a crisp, clean menthol chill.

Blue Raspberry

• Blue Fusion — A vivid blue razz blend fused with complementary berry and fruit notes.
• Blue Frozen — Electric blue raspberry with a powerful frozen ice close.
• Blue Razz Blackcurrant — Bold blue raspberry and rich dark blackcurrant — vivid and complex.
• Blue Razz Cherry — Electric blue raspberry and dark ripe cherry — sharp meets sweet.
• Blue Razz Fruit Twist — Sour blue raspberry meets a rainbow of candy fruit in a vivid twist.
• Blue Razz GB — Blue raspberry candy sweetness — the classic GB gummy bear character.
• Blue Razz Lemonade — Tangy blue raspberry with zesty, sparkling lemonade brightness.
• Blue Razz Mojito — Blue raspberry sharpness with fresh mint and lime — mojito-inspired.
• Blue Razz Pineapple — Electric blue razz and tart tropical pineapple — bold and vivid.
• Blue Sour Raspberry — Blue raspberry candy sharpened with a vivid sour twist mid-draw.
• Mad Blue — A bold, intense blue razz profile with a deep, vivid character.
• Mr Blue — Dark blueberry, blackberry, and raspberry with a light cool menthol finish.
• Red Sour Raspberry — Sweet red fruit opening into a candy-tart sour raspberry sharpness.

Soda, Drinks & Citrus

• Blackcurrant Juice — Deep, dark blackcurrant — clean, naturally sweet, and vivid.
• Blackcurrant Lemonade — Sharp dark blackcurrant depth lifted by zesty lemonade brightness.
• Caribb Crush — An exotic tropical fruit medley with lively, effervescent character.
• Cherry Cola — Sweet ripe cherry with classic cola fizz — nostalgic and vivid.
• Cola Ice — Classic cola sweetness finished with a clean, cold icy close.
• Cola Lime — Bold cola character brightened and sharpened with fresh lime zest.
• Lemon Lime — Sharp lemon and sweeter lime in clean, refreshing citrus balance.
• Pink Lemonade — Bright lemonade with strawberry-raspberry berry sweetness behind it.
• Pipeline Punch — A bold, energetic fruit punch with vivid tropical complexity.
• Tropical Sour Juice — A tangy tropical fruit juice with a vivid sour edge throughout.
• Berry Lemonade — Juicy mixed berries with a refreshing, zesty lemonade brightness.
• Pineapple Lemon Burst — Tart pineapple and sharp lemon — vivid, citrus-forward, and bright.

Candy & Sweet

• Blueberry B Gum — Sweet blueberry softened into warm bubblegum candy sweetness.
• Fizzy Cherry — Cherry candy sweetness with a sparkling fizzy sherbet exhale.
• Grape GB — Vivid candy-grape with the warm gummy bear sweet character.
• Hubba Bubba — Classic bubblegum sweetness — warm, soft, and candy-vivid.
• Rocky Candy Orange — Vivid orange sweetness with a candy, slightly fizzy rocky character.
• Sakura Grape — Delicate floral sakura with deep grape sweetness — soft and exotic.
• Strawberry GB — Sweet strawberry in candy gummy bear form — vivid and confectionery.
• Strawberry H Bubba — Vivid strawberry wrapped in warm hubba bubba bubblegum sweetness.
• Black Mamba — A bold, dark, intense mystery berry profile with deep character.

Menthol & Mint

• Double Menthol — Two layers of clean menthol — powerful, cold, and botanical.
• Fresh Mint — Pure herbal spearmint — light, clean, and naturally cooling.
• Kiwi Cooler — Tart kiwi fruit with a fresh, cooling menthol close.
• Mixed Berries — A clean mix of sweet berries with a cool, refreshing finish.
• Spearmint — Gentle sweet spearmint — a lighter, less intense mint than menthol.
• Strawberry Raspberry Mojito — Sweet strawberry and raspberry with mint and lime — mojito-inspired.

Tropical

• Peach Green Tea — Warm ripe peach with the gentle, earthy depth of green tea.
• Triple Melon — Three melon varieties — watermelon, honeydew, cantaloupe — in one draw.

Tobacco & Dessert

• Smooth Tobacco — Warm, rounded tobacco — smooth, clean, and free of harshness.
• T-Misu — Tiramisu-inspired — coffee, cream, and soft sponge in dessert form.
• Cream Tobacco — Golden buttery cream layered over warm, earthy tobacco depth.

Up to 6,000 Puffs — What That Means

Up to 6,000 puffs from 12ml of Hayati e-liquid per pack — usage dependent on draw length, vaping frequency, and storage conditions. Shorter, more controlled MTL draws typically extend the pod's lifespan; longer draws will reduce the total count. The 6,000-puff figure is the manufacturer's estimate and should be treated as a ceiling rather than a guarantee.

The Hayati Pro Max Plus 6000 system delivers significantly more puffs per replacement pack than standard prefilled kits, reducing how often replacements are needed. When flavour noticeably drops and vapour output weakens together, the pack is nearing empty.

How to Replace Your Hayati Pro Max Plus Pod

1. Remove the empty pod from the top of the Hayati Pro Max Plus 6000 device before fitting the new one.
2. Peel all protective stickers and bungs from both the fresh 2ml pod and the 10ml container — ensure all are removed before connecting.
3. Line up the 2ml pod and 10ml container and connect them through the magnetic push fit — the two components align and click together magnetically.
4. Insert the combined unit into the rechargeable Hayati device until fully seated. Allow approximately 30 seconds for the coil to saturate before inhaling — this helps deliver full flavour from the first draw and helps avoid a dry start.

Three Common Buying Mistakes — and How to Avoid Them

Wrong device model. Hayati Pro Max Plus 6000 pods are designed exclusively for the Hayati Pro Max Plus 6000 device. They will not fit the Hayati Pro Max 4K, Hayati Pro Ultra Plus, or any other Hayati model. Check your device model before ordering.

Forgetting to remove the bungs. Every pod pack comes with protective stickers and bungs on both the 2ml pod and the 10ml container. All must be peeled off before connecting the two components. Leaving a bung in place will prevent the auto-refill system from working and can result in a dry draw.

Not allowing coil saturation time. After installing a fresh pod, allow approximately 30 seconds before taking the first draw. This gives the e-liquid time to fully saturate the 1.2Ω dual mesh coil. Drawing immediately on installation can produce a dry or harsh first puff that does not reflect the pod's performance.

Compatible With: Hayati Pro Max Plus 6000 Only

Hayati Pro Max Plus 6000 pods are designed exclusively for the Hayati Pro Max Plus 6000 device. They are not compatible with the Hayati Pro Max 4K, the Hayati Pro Ultra Plus, or any other Hayati model. They will also not fit third-party pod devices. The magnetic push fit, pod dimensions, and auto-refill system are specific to the Hayati Pro Max Plus 6000 platform only. If you do not yet own the device, it is available in the Hayati Pro Max Plus range at Vapourcore.

Specifications

• Product Type: Replacement prefilled pod pack — no device included
• Pack Contents: 1x 2ml prefilled pod (1.2Ω advanced dual mesh coil integrated) + 1x 10ml auto-refill container
• Total E-Liquid: 12ml per pack (2ml + 10ml)
• Puffs: Up to 6,000 per pack (usage dependent)
• Coil: 1.2Ω advanced dual mesh coil — integrated into 2ml pod
• Nicotine Type: Nicotine salt (5mg, 10mg, 20mg) | Nicotine-free (0mg)
• Nicotine Strengths: 0mg (nicotine-free, 25+ flavours) | 5mg (20+ flavours) | 10mg (30+ flavours) | 20mg (full flavour range)
• Vaping Style: MTL (Mouth to Lung)
• Activation: Inhale activated — no buttons
• Connection: Magnetic push fit (2ml pod + 10ml container)
• Mouthpiece: Ergonomic
• Refillable: No — sealed prefilled system
• Compatible Device: Hayati Pro Max Plus 6000 only
• Flavours: 75
• TPD Compliant: Yes

FAQs

What are Hayati Pro Max Plus 6000 Pods?

Hayati Pro Max Plus 6000 Pods are the official replacement pod packs for the Hayati Pro Max Plus 6000 rechargeable vape device. Each pack contains a 2ml prefilled pod with an integrated 1.2Ω dual mesh coil and a 10ml auto-refill container — 12ml of Hayati e-liquid in total. Available in 75 flavours across 0mg, 5mg, 10mg, and 20mg, delivering up to 6,000 puffs per pack (usage dependent).

How many flavours are available?

Seventy-five flavours are available, spanning fruit, icy fruit, soda and drinks, candy and sweet, menthol and mint, and tobacco profiles. 20mg is available across the full flavour range. A selection is available in 10mg, 5mg, and 0mg — all flavours are individually listed and linked above with dedicated product pages.

What nicotine strengths are available?

Four options are available: 0mg (nicotine-free — 25+ flavours), 5mg (20+ flavours), 10mg (30+ flavours), and 20mg (full flavour range). The 5mg, 10mg, and 20mg options use nicotine salt. The 0mg option is nicotine-free. Strength availability varies by flavour — check the individual product page before ordering.

How does the 2ml + 10ml system work?

Each pack contains two components: a 2ml prefilled pod with the 1.2Ω dual mesh coil built in, and a 10ml refill container. The two connect through the magnetic push fit before being inserted into the device as a single unit. The 10ml container automatically tops up the 2ml pod as e-liquid is consumed — no manual refilling required throughout the pod's lifespan.

How do I replace the pod?

Remove the empty pod from the top of the device first. Peel all protective stickers and bungs from the fresh 2ml pod and 10ml container. Line the two components up and connect them through the magnetic push fit. Insert the combined unit into the device until fully seated. Allow approximately 30 seconds for coil saturation before inhaling — the device activates automatically on inhalation.

What is the magnetic push fit?

The magnetic push fit is the connection mechanism between the 2ml prefilled pod and the 10ml refill container. The two components align and click together magnetically before being inserted into the device as one unit. This creates a secure connection designed to minimise e-liquid leakage between the pod and its auto-refill reservoir throughout the pack's lifespan.

How many puffs does each pack deliver?

Each Hayati Pro Max Plus 6000 pod pack delivers up to 6,000 puffs from the combined 12ml of Hayati e-liquid. This is a manufacturer estimate — actual puff count varies depending on draw length, vaping frequency, and storage conditions. Shorter MTL draws typically extend the pod's lifespan; longer draws will reduce the total count.

When should I replace the pod?

Replace when flavour intensity noticeably drops and vapour output weakens — both signals together indicate the 2ml pod and 10ml container are nearing empty. Do not replace based on the 10ml container appearing empty alone — the 2ml pod may still contain e-liquid. When both flavour and vapour performance drop together, swap the pack.

What type of coil is in each pod?

Every Hayati Pro Max Plus 6000 pod contains an integrated 1.2Ω advanced dual mesh coil built into the 2ml pod unit. The dual mesh design uses two coil elements for even, consistent heating across the pod's lifespan. A fresh 1.2Ω dual mesh coil is included with every replacement pack — no separate coil purchases required.

What vaping style do the pods support?

Hayati Pro Max Plus 6000 pods are designed for MTL (Mouth to Lung) vaping — drawing vapour into the mouth before inhaling into the lungs. This closely replicates the sensation of smoking. The device is inhale-activated — no buttons. The 1.2Ω coil resistance is optimised for MTL airflow and smooth vapour delivery.

Can the pods be manually refilled?

No. The 2ml pod and 10ml container are sealed prefilled units — they cannot be manually refilled from an external bottle. The 10ml container feeds the pod automatically throughout its lifespan. Once both are exhausted, dispose of responsibly and replace with a fresh sealed unit. Attempting to manually refill may cause leaks or coil damage.

Are these pods compatible with other Hayati devices?

No. Hayati Pro Max Plus 6000 pods are designed exclusively for the Hayati Pro Max Plus 6000 device. They are not compatible with the Hayati Pro Max 4K, Hayati Pro Ultra Plus, or any other Hayati model or third-party device. The pod's magnetic connection, form factor, and auto-refill system are specific to the Hayati Pro Max Plus 6000 only.

Are the pods leak-resistant?

Yes. The sealed casing and magnetic push fit connection are designed to minimise e-liquid leakage during everyday carry and use. Storing the device upright when not in use is recommended for optimal performance. Ensure all protective stickers and bungs are fully removed from both components before connecting them.

What is the difference between 0mg, 5mg, 10mg, and 20mg?

0mg contains no nicotine — for vapers who want the full flavour experience without any nicotine. 5mg is a lower-strength nicotine salt suited to those reducing their nicotine intake. 10mg is a mid-strength nicotine salt suited to regular vapers who have stepped down from 20mg. 20mg is the highest available strength nicotine salt, suited to adult smokers switching to vaping or those moving from disposable bars.

What does the nicotine salt formula do?

Nicotine salt absorbs more quickly and smoothly than freebase nicotine, allowing higher concentrations to be vaped without the harsh throat hit associated with freebase at equivalent strengths. The 5mg, 10mg, and 20mg Hayati Pro Max Plus pods use nicotine salt. The 0mg option is nicotine-free and does not contain nicotine salt.

Are Hayati Pro Max Plus pods TPD compliant?

Yes. All Hayati Pro Max Plus 6000 pods at Vapourcore are fully UK TPD compliant. The 2ml prefilled pod stays within UK legal limits for sealed prefilled pods. The 10ml container is a sealed, closed auto-refill system. All pods are supplied in compliance with UK TRPR regulations.

How long does one pod pack last?

Duration varies considerably between users based on draw length and frequency. Up to 6,000 puffs is the manufacturer estimate from the combined 12ml — actual yield is usage dependent. Replace when flavour noticeably drops and vapour decreases, rather than counting puffs or days.

Are these pods suitable for ex-smokers?

Yes. The Hayati Pro Max Plus 6000 system is well suited to ex-smokers and those switching from cigarettes or disposable bar vapes. The MTL draw replicates cigarette inhalation. The 20mg nicotine salt delivers fast, smooth satisfaction. Inhale-activated, no buttons, no settings — straightforward from the first use, with significantly more puffs per pack than a disposable.

What is the difference between the Hayati Pro Max Plus 6000 and other Hayati devices?

The Hayati Pro Max Plus 6000 uses the 2ml+10ml magnetic push fit pod system described on this page. The Hayati Pro Max 4K uses a different pod format with a lower puff count. The Hayati Pro Ultra Plus uses a larger capacity system. Pods from these devices are not interchangeable — always confirm your device model before ordering replacement pods.

Are these the same pods as in the Hayati Pro Max Plus 6000 Kit?

Yes. The Hayati Pro Max Plus 6000 replacement pods sold here are the same pods included in the Hayati Pro Max Plus 6000 Kit. When your first pod pack is exhausted, replace it from this collection. All 75 flavours, all four nicotine options, and all pod specifications are identical to the pods supplied in the kit box.

Delivery & Returns

For UK delivery options, timescales, and costs, visit our delivery and shipping page. For return eligibility and process details, visit our returns page.

Important Information

• For use by adults aged 18 and over only
• Nicotine-containing strengths (5mg, 10mg, 20mg) contain nicotine salt — nicotine is an addictive substance
• 0mg option is nicotine-free — available in 25+ flavours, check individual product pages for availability
• Nicotine-containing strengths are not suitable for non-smokers, those who have never vaped, or people who are pregnant
• If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
• Keep out of reach of children and pets
• Compatible with Hayati Pro Max Plus 6000 device only — replacement pod packs, no device included
• Not refillable — sealed prefilled system. Replace entire pack when exhausted.
• UK TPD compliant