Common Mistakes — and How to Avoid Them
- Replacing too early: the 10ml container may appear empty while the 2ml pod still holds e-liquid. Wait for a sensory drop in flavour or vapour before replacing — not based on the visual state of the container
- Ordering for the wrong device: Geek Bar Hagimi Pro Max Refill Pods are compatible with the Geek Bar Hagimi Pro Max 10K and confirmed cross-compatible with the Hayati Pro Max Plus. They are not compatible with other Geek Bar models or previous Geek Bar kit versions
- Attempting to refill: these are sealed prefilled packs. Do not attempt to open or refill either component — replace the entire pod-and-container unit when exhausted
- Not removing seals before use: remove all rubber stoppers and stickers from both the 2ml pod and the 10ml container before assembling. Leaving a seal in place will prevent the auto-refill from working
- Chain vaping when flavour drops: if flavour starts to thin, allow the device a brief rest before concluding the pack is finished — rapid consecutive draws can outpace the auto-refill feed temporarily
Specifications
- Product type: Replacement refill pack — device not included
- Pack contents: 1x 2ml prefilled pod + 1x 10ml auto-refill container
- Total e-liquid: 12ml per pack
- Puffs: Up to 10,000 per pack (manufacturer estimate, usage dependent)
- Nicotine: 20mg nicotine salt only
- Coil: 0.8Ω VPU dual mesh — ceramic cores, integrated into 2ml pod, fresh with every pack
- Vaping style: MTL (Mouth to Lung)
- Activation: Auto-draw via Geek Bar Hagimi Pro Max 10K device
- Compatible devices: Geek Bar Hagimi Pro Max 10K | Cross-compatible: Hayati Pro Max Plus (confirmed)
- Refillable: No — sealed prefilled system
- Leak-resistant construction (usage dependent)
- Flavours: 20 (10 kit flavours, 10 pod-only exclusives)
- MHRA: Geek Bar company code 05160
- TPD compliant: Yes
FAQs
What are Geek Bar Hagimi Pro Max 10K Refill Pods?
Geek Bar Hagimi Pro Max 10K Refill Pods are the official replacement packs for the Geek Bar Hagimi Pro Max 10K Kit. Each pack contains a 2ml prefilled pod and a 10ml auto-refill container — 12ml of 20mg nicotine salt per pack — delivering up to 10,000 puffs through a 0.8Ω VPU dual mesh coil with ceramic cores. Device not included. Compatible with Geek Bar Hagimi Pro Max 10K and confirmed cross-compatible with Hayati Pro Max Plus devices.
How many flavours are available?
20 flavours are available — 10 shared with the complete Hagimi Pro Max 10K kit range and 10 available as refill pods only. Pod-only exclusives include Banana Ice, Blue Razz Cherry, Caribbean Crush, Cherry Cola, Cola Lime, Hubba Bubba, Mad Blue, Sour Apple Ice, Triple Mango, and Watermelon Ice. All 20 are individually linked in the flavour section above.
How does the 2ml + 10ml auto-refill system work?
Each replacement pack contains a 2ml prefilled pod and a 10ml auto-refill container. The 10ml container automatically feeds e-liquid into the 2ml pod as you vape — no manual action required. When both are exhausted — signalled by a drop in flavour intensity or vapour production — remove the entire unit and replace with a fresh pack. Do not replace based on the visual appearance of the 10ml container alone.
When should I replace my Hagimi Pro Max refill pod?
Replace when flavour intensity noticeably drops or vapour production decreases. The 10ml container may appear empty while the 2ml pod still holds e-liquid — wait for the sensory signal before replacing. A dry or burnt note on the exhale is the clearest replacement indicator. Replace the entire pod-and-container unit — both components are exhausted together.
How many puffs does each refill pod give?
Up to 10,000 puffs per replacement pack from the 12ml total (manufacturer estimate, usage dependent). Actual yield varies with draw length and frequency. The sensory signal — a noticeable drop in flavour or vapour — is the correct replacement indicator, not a fixed puff count or the visual state of the container.
What is VPU Technology?
VPU is Geek Bar's proprietary coil system — a 0.8Ω dual mesh coil with ceramic cores integrated into the 2ml pod. Dual mesh heats e-liquid across two surfaces simultaneously for wider contact and more even heating. Ceramic cores hold the e-liquid close to the coil surface, helping to reduce dry hits and maintain consistent flavour across the full 12ml set. A fresh VPU coil comes with every replacement pack automatically.
What is Fcuking FAB flavour?
Fcuking FAB is Geek Bar's most recognised profile — a strawberry, raspberry, and menthol blend. Ripe strawberry opens the inhale, tangy raspberry sharpens mid-draw, and a cool menthol note arrives before a fresh berry-menthol exhale. It is sometimes described as Cherry Berry by other sources; the confirmed Geek Bar profile is strawberry, raspberry, and menthol.
Are these pods compatible with the Hayati Pro Max Plus?
Yes — confirmed. Geek Bar Hagimi Pro Max 10K Refill Pods are cross-compatible with the Hayati Pro Max Plus device. All 20 Hagimi Pro Max 10K refill flavours are available to use in a Hayati Pro Max Plus device. They are not compatible with other Geek Bar models or previous Geek Bar kit versions.
What nicotine strength are Hagimi Pro Max refill pods?
All 20 Geek Bar Hagimi Pro Max 10K refill flavours are available in 20mg nicotine salt only. This is the sole strength available across the full range. The 20mg nic salt formula is well suited to the MTL draw style of the Hagimi Pro Max 10K device.
What vaping style do Hagimi Pro Max refill pods use?
Geek Bar Hagimi Pro Max 10K Refill Pods are designed for MTL (Mouth to Lung) vaping — a tight, controlled, cigarette-like draw. Activation is auto-draw through the Hagimi Pro Max 10K or Hayati Pro Max Plus device — no button press required. Airflow is fixed and cannot be adjusted.
What are the pod-only exclusive flavours?
Ten flavours are available as replacement pods only and are not offered in the complete Hagimi Pro Max 10K kit: Banana Ice, Blue Razz Cherry, Caribbean Crush, Cherry Cola, Cola Lime, Hubba Bubba, Mad Blue, Sour Apple Ice, Triple Mango, and Watermelon Ice. These are only available as standalone refill packs.
How do I install a Hagimi Pro Max replacement pod?
Remove all rubber seals and stickers from both the 2ml pod and the 10ml container. Install the combined unit into the Geek Bar Hagimi Pro Max 10K or Hayati Pro Max Plus device. Inhale through the mouthpiece — auto-draw activation, no button required. The 10ml container automatically feeds e-liquid into the 2ml pod throughout use.
What is the difference between a kit flavour and a pod-only exclusive?
Kit flavours are available both as complete Hagimi Pro Max 10K prefilled pod kits (device + first refill set) and as standalone replacement packs. Pod-only exclusives are available as standalone replacement packs only — they are not available in the complete kit format. Both types use the same 0.8Ω VPU coil and 12ml (2ml + 10ml) format.
Is the Hagimi Pro Max refill pod a disposable vape?
No. The Geek Bar Hagimi Pro Max 10K Refill Pod is a replacement pack for a rechargeable device — the device itself is reused across multiple refill sets. Only the 2ml pod and 10ml container are replaced when exhausted. A single-use disposable bar is discarded entirely when empty; the Hagimi Pro Max system replaces only the consumable component, reducing device waste per equivalent puff count.
Are Hagimi Pro Max refill pods TPD compliant?
Yes. All 20 Geek Bar Hagimi Pro Max 10K refill flavours are fully UK TPD compliant, MHRA-notified under Geek Bar's company code 05160. The 2ml prefilled pod stays within UK legal e-liquid container limits. The 10ml refill container is a sealed, compliant auto-refill system.
Which Hagimi Pro Max flavour should I try first?
If you have vaped Geek Bar before, start with Fcuking FAB — it is the most recognised Geek Bar profile and a reliable reference point. For iced fruit, Pineapple Ice and Strawberry Raspberry Ice are the most popular. For something purely refreshing, Fresh Mint or Lemon & Lime. For a pod-only exclusive, Caribbean Crush (three tropical elements) or Mad Blue (layered dark berries) are the most distinctive.
How long does a 12ml refill set last?
Under moderate daily use, many vapers find the 12ml set lasts considerably longer than a standard 2ml single-use bar. Actual duration depends on draw length and frequency. The correct signal to replace is sensory — a drop in flavour or vapour — rather than elapsed time or the visual state of the 10ml container.
Can I switch flavours between replacement packs?
Yes. Each replacement pack is a self-contained sealed unit. When one pack is exhausted, any of the 20 available flavours can be installed as the next replacement. Flavour carryover between packs is typically minimal.
Do Hagimi Pro Max refill pods require priming?
The 0.8Ω VPU coil is designed to reach operating temperature quickly and typically delivers full flavour from the first draw (usage dependent). If you notice reduced flavour on the very first puff from a new pack, allow the device a brief rest of a few seconds before drawing again — this allows the e-liquid to fully reach the coil surface.
Where can I find the Geek Bar Hagimi Pro Max 10K Kit?
The complete Geek Bar Hagimi Pro Max 10K Prefilled Pod Kit — including the device, first refill set, and user manual — is available in the Hagimi Pro Max kit collection at Vapourcore. If you do not yet own the device, the kit is the correct starting point before purchasing replacement pods.
Delivery & Returns
For UK delivery options, timescales, and costs, visit our delivery and shipping page. For return eligibility and process details, visit our returns page.
Important Information
- UK TPD compliant — MHRA registered, Geek Bar company code 05160
- Contains 20mg nicotine salt — nicotine is addictive
- Not suitable for non-smokers, those who have never vaped, or people who are pregnant
- If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
- Keep out of reach of children and pets
- Compatible with Geek Bar Hagimi Pro Max 10K devices — confirmed cross-compatible with Hayati Pro Max Plus devices. Not compatible with other Geek Bar models or previous kit versions
- Not refillable — sealed prefilled system. Replace entire pack when exhausted
- Remove all rubber seals from both components before use