Pixl 8000 Blueberry Raspberry Refill Pods
PIXL Pixl 8000 Blueberry Raspberry Refill Pods are refill-only replacement pods for adult users who want a clear berry-led flavour in the Pixl 8000 system. This is not the full device. Each pack is built for the Pixl 8000 kit only and combines 12ml total e-liquid capacity, 20mg nic salt, a mesh coil and MTL vaping for a smooth, consistent everyday draw.
Pixl 8000 Blueberry Raspberry Refill Pods are designed for buyers who want more shape than a vague mixed berry flavour. The blueberry side brings the smoother, sweeter body, while raspberry adds a brighter, sharper edge that keeps the blend lively from first inhale to finish. That makes it easier to place than generic berry pods and more balanced than one-note sweet fruit options.
At a Glance
- Flavour profile: sweet blueberry with a sharper raspberry finish
- Nicotine strength: 20mg nic salt
- Total capacity: 12ml
- Vaping style: mesh coil for MTL use
- Compatibility: for the Pixl 8000 kit only
- Product type: refill-only replacement pods, not the full device
Flavour Profile
Blueberry Raspberry is a layered berry blend with a clear split between body and lift. The inhale leans into blueberry first, giving the flavour a rounder, slightly sweeter core that feels fuller than a plain raspberry pod. That smoother blueberry note gives the blend weight and keeps it from tasting thin or overly sharp.
Raspberry comes through more clearly as the flavour develops, adding a brighter edge that lifts the sweeter blueberry base. Instead of turning the blend sour or overly tangy, it brings a clean berry sharpness that makes the flavour feel better defined and more active on the palate.
Together, the two notes give Pixl 8000 Blueberry Raspberry Refill Pods a more deliberate berry profile than a generic mixed berry pod. It is sweeter and smoother than sharper single-berry flavours, but it still has enough raspberry bite to stop the finish feeling flat. That balance makes it a strong choice for users who want berry flavour with both depth and contrast.
Key Features
- Pixl 8000 Blueberry Raspberry Refill Pods
- Prefilled refill pods / replacement pods
- 12ml total capacity
- 2ml prefilled pod + 10ml refill container
- 20mg nic salt e-liquid
- Mesh coil design
- MTL vaping style
- Up to 8,000 puffs
- Compatible only with the Pixl 8000 kit
- TPD compliant
- For adult users aged 18+ only
Why Choose This Flavour / Who It Suits
This flavour suits adult users who want a berry profile that feels more structured than a general mixed berry blend. If plain blueberry can feel too soft and sharper berry flavours can feel too narrow, Blueberry Raspberry sits comfortably in the middle. The blueberry keeps it smooth and rounded, while the raspberry gives it enough edge to stay interesting across repeated use.
It is also a sensible choice for buyers who like fruit-led pods but do not want something that leans too heavily into candy sweetness. Compared with flatter blueberry flavours, this blend has more movement. Compared with sharper single-berry options, it feels more complete and easier to use throughout the day.
Compatibility
These pods are compatible only with the Pixl 8000 Prefilled Vape Kit. They are not universal pods, they are not suitable for other devices, and they are not the full Pixl 8000 unit. If you need the device itself, buy the kit separately. If you already own the correct device and only need a replacement flavour, these are the correct product type.
Specifications
| Brand | PIXL |
| Product Name | Pixl 8000 Blueberry Raspberry Refill Pods |
| Product Type | Prefilled refill pods / replacement pods |
| Flavour | Blueberry Raspberry |
| Total Capacity | 12ml |
| Pod Format | 2ml prefilled pod + 10ml refill container |
| Nicotine Strength | 20mg nic salt |
| Coil | Mesh coil |
| Vaping Style | MTL |
| Puff Count | Up to 8,000 puffs |
| Compatibility | Compatible only with the Pixl 8000 kit |
| Compliance | TPD compliant |
How to Use
- Unpack the refill pod and refill container and remove any protective seals or caps.
- Check that you are using a Pixl 8000 device, as these replacement pods are made only for that kit.
- Insert the pod and connect the refill container correctly according to the Pixl 8000 setup.
- Allow the system a short moment to settle before first use so the liquid feed can equalise properly.
- Inhale as normal for MTL vaping once everything is fitted securely.
- Replace the pod when flavour drops off, vapour output weakens or the refill has reached the end of normal use.
What’s in the Box
- 1 x 2ml prefilled pod
- 1 x 10ml refill container
Troubleshooting
No vapour
Check that the pod is fitted correctly and that you are using a compatible Pixl 8000 device. A poor connection is the most common cause.
Weak flavour
Make sure the pod is seated properly and the contact points are clean. If the flavour still feels muted, the pod may be nearing the end of its usable life.
Burnt taste
A burnt taste usually means the pod has been used up and needs replacing. Continuing to use it will not improve flavour.
Condensation
A small amount of condensation can appear with normal use. Remove the pod, wipe the area gently and reinsert it.
Lower-than-expected puff count
Up to 8,000 puffs is a manufacturer estimate and actual results vary depending on draw length, usage frequency and vaping style.
Delivery & Returns
For delivery times, dispatch information and shipping options, please visit our Delivery & Shipping page.
If you need policy details before ordering, see our Returns page for further information.
Frequently Asked Questions
1. What do Pixl 8000 Blueberry Raspberry Refill Pods taste like?
They taste like a layered berry blend, with smoother, sweeter blueberry up front and a brighter raspberry edge through the finish.
2. Is this the full kit or refill only?
This is refill only. It is not the full Pixl 8000 device.
3. What nicotine strength do they use?
They contain 20mg nic salt e-liquid.
4. How many puffs do they offer?
They provide up to 8,000 puffs, which is a manufacturer estimate and usage dependent.
5. What device are they compatible with?
They are compatible only with the Pixl 8000 kit.
6. Are these pods refillable or prefilled?
They are prefilled refill pods and are not intended to be manually refilled by the user.
7. What coil type and vaping style do they use?
They use a mesh coil and are designed for MTL vaping.
8. How do I use Pixl 8000 Blueberry Raspberry Refill Pods?
Fit the pod into a compatible Pixl 8000 device, make sure it is seated correctly, allow it to settle briefly, then inhale as normal.
9. Who does this flavour suit?
It suits adult users who want a berry flavour with a smoother blueberry body and a sharper raspberry finish, rather than a vague mixed berry pod.
10. Are Pixl 8000 Blueberry Raspberry Refill Pods TPD compliant?
Yes. They are TPD compliant and intended for adult users aged 18+ only.
Compliance and Safety
This product is intended for adult users aged 18 and over only. Age-restricted sales are subject to our Age Verification process.
Contains nicotine. Nicotine is a highly addictive substance.
Use only with the Pixl 8000 kit. Keep out of reach of children and pets. Do not attempt to refill, disassemble or modify the pod. Puff count is a manufacturer estimate and actual performance is usage dependent.
Pixl 8000 Blueberry Raspberry Refill Pods are a strong fit for adult users who want a berry flavour with clear contrast, reliable Pixl 8000 compatibility and straightforward refill-only convenience. The blueberry gives the blend its smoother, sweeter body, while raspberry keeps the finish brighter and better defined, making this a more deliberate option than a loose mixed berry profile. To explore more flavours in the same system, browse the Pixl 8000 Pod Refills collection, or see the PIXL nic salt e-liquid collection for more flavour-led options.
Buy this as a disposable:
