SKE 30K Pro Max Prefilled Pods

SKE 30K Pro Max Prefilled Pods are the replacement pod packs designed for the SKE 30K Pro Max device, available to adult nicotine users aged 18 and over. Each pack contains two 1.8ml prefilled pods and two 8.2ml auto-refill containers — 20ml of SKE Crystal Original V2 nicotine salt in total — and provides up to 30,000 puffs per pack (usage dependent). The e-liquid is 20mg (2%) nicotine salt at a 50/50 VG/PG ratio, formulated for the MTL draw style of the SKE 30K Pro Max. These pods are compatible with the SKE 30K Pro Max only and cannot be used in any other SKE device or third-party hardware. If you need the device itself, the SKE 30K Pro Max kit collection has hardware options available.

Quick Overview

• Compatible device: SKE 30K Pro Max only — not for use with any other device
• Total e-liquid per pack: 20ml (2 x 1.8ml pods + 2 x 8.2ml auto-refill containers)
• Puff count: Up to 30,000 total (~15,000 per pod set, usage dependent)
• E-liquid: SKE Crystal Original V2 nicotine salt, 20mg (2%), 50/50 VG/PG
• Auto-refill: The 8.2ml container automatically feeds the 1.8ml pod — no manual topping up required
• Coil: Built-in mesh coil — no coil changes needed
• Activation: Draw-activated MTL — no buttons
• Single Editions: Both pods contain the same flavour for one consistent taste
• Named Editions: Two different flavours per pack with a twist-to-switch mouthpiece on the device
• Compliance: TPD compliant — UK MHRA

What Are SKE 30K Pro Max Prefilled Pods?

SKE 30K Pro Max Prefilled Pods are the replacement pod packs for the SKE 30K Pro Max device. When a pod set has been fully exhausted, the entire pod and auto-refill container are replaced together as a single unit — there are no individual components to reorder or separate. The system is designed to be straightforward: connect the new container to the new pod, insert the assembled set into the device, and vape.

The auto-refill system is what makes the format distinctive. Each pod set uses a two-part design: a 1.8ml pod that holds the e-liquid the device vapes from directly, and an 8.2ml container that connects to the pod and automatically feeds it throughout its lifespan. The user does not need to top up, monitor, or intervene at any point — the container delivers e-liquid to the pod continuously as it is consumed. The total capacity per pod set is 10ml (1.8ml + 8.2ml), and with two pod sets per pack, each pack holds 20ml of e-liquid in total.

The format is particularly well suited to adult vapers who have previously used single-use disposable devices and want a higher-capacity, device-reusable system that works in a similar way. Because the e-liquid and coil are pre-installed in the pod, there is no filling required beyond waiting 20–30 seconds for the coil to prime before the first draw on a new pod set. The MTL draw style of the device mirrors the draw resistance of most disposable vapes in the same category.

Single Editions vs Named Editions

All SKE 30K Pro Max Prefilled Pods come in one of two edition types: Single Editions or Named Editions. Both use the same 20ml pack format, the same 20mg (2%) Crystal Original V2 nicotine salt, and the same device. The difference is purely in how the flavour content is arranged across the two pod sets.

A Single Edition contains two pod sets that both carry the same flavour — so both pod sets deliver the same taste, giving up to 30,000 puffs of one consistent draw. When the first pod set is exhausted after approximately 15,000 puffs (usage dependent), the second is inserted and the same flavour continues. Single Editions are the right choice for adult vapers who have a preferred flavour and want to run it in full without variation.

A Named Edition contains two pod sets with two different flavours — one per pod set, each delivering approximately 15,000 puffs (usage dependent). The SKE 30K Pro Max device includes a twist-to-switch mouthpiece that rotates the airflow between the two pods without requiring the user to remove anything. Both pod sets are accessible from the start; you can switch freely rather than exhausting one before moving to the other. Named Editions suit adult vapers who want variety within a single pack, or who prefer to alternate between flavours during the day.

Both formats cost the same and produce identical results in terms of total e-liquid, nicotine delivery, and puff count. The only decision is whether you want one flavour consistently or two alternating options.

Flavours & Editions (Shop by Taste)

All SKE 30K Pro Max Prefilled Pods are part of the broader SKE brand range. To browse the wider range of prefilled pod options across other compatible devices, see the prefilled vape pods collection.

Berry & Blue Blends — Single Editions

• Blueberry Raspberry — Soft, sweet blueberry on the inhale with a brighter raspberry tang developing through the mid-draw and close. A clean, two-berry draw with a lightly tart finish.
• Blue Sour Raspberry — A sharp, fizzy candy-style sourness opens the draw before a vivid blue raspberry sweetness builds through the mid. Tangy-sweet finish; best for adult vapers who enjoy sour confectionery.
• Blue Razz Lemonade — A bright lemonade-style citrus opens the draw and a blue razz candy sweetness fills the body through the mid-draw and close. Citrus-led with a confectionery finish.

Lemonade, Citrus & Sharp — Single Editions

• Lemon & Lime — Sharp lemon leads, with a crisper lime close. A clean, palate-active two-note citrus with low sweetness and a mouth-watering, zesty finish.
• Pink Lemonade — Lemonade-style sweet-and-tart citrus with a softer rounded sweetness running through the body. A more approachable, fuller citrus draw than a plain lemon-lime profile.
• Sour Pineapple — Bright, juicy pineapple with a sharp sour tang from the first puff. A lively, mouth-active tropical fruit draw with a zingy, palate-active finish.

Cherry & Sweet Profiles — Single Editions

• Cherry Ice — Bold, candy-leaning sweet cherry with a crisp, neutral cooling finish that lifts the exhale and keeps each draw feeling clean and refreshing.
• Bubble Cherry — Sweet red cherry with a soft bubblegum-style sweetness that develops through the mid-draw and rounds the finish. Warm and confectionery-leaning throughout.

Strawberry & Watermelon — Single Editions

• Strawberry Ice — Smooth, ripe strawberry sweetness with a clean neutral ice finish. A consistent, sessionable fruit draw with a crisp, palate-clearing close.
• Watermelon Ice — Clean, watery watermelon sweetness with a neutral cooling close. Fresh and light, with a refreshing ice finish that clears the palate between draws.

Named Editions — Two-Flavour Packs

• Berry Edition — Pairs a smooth Berry pod with a fuller Mixed Berries medley pod. Both are warm, sweet berry draws suited to adult vapers who want berry variety within a single pack.
• Blue Edition — Combines the sour-first Blue Sour Raspberry with the lemonade-led Blue Razz Lemonade. Two blue candy profiles — one sharper, one citrus-bright — in a single pack.
• Bubblegum Edition — Pairs a Grape Gum pod (sweet grape over a bubblegum base) with a Classic Bubblegum pod (pure single-note bubblegum). Both warm and confectionery throughout.
• Cherry Edition — Combines the crisp, ice-finished Cherry Ice with the warmer, bubblegum-style Bubble Cherry. A cool cherry vs sweet cherry pairing on either side of the mouthpiece.
• Fruit Edition — Pairs the tangy Sour Pineapple with a smooth, blended Fruit Medley. A sharp single-fruit draw alongside a broader, more rounded mixed-fruit option.
• Green Edition — Combines the crisp two-note Lemon Lime with a layered Kiwi Passionfruit Guava. A citrus-simple vs tropical-progressive pairing with clear contrast across the two pods.
• Rose Edition — Pairs the smooth, ice-finished Strawberry Ice with the zesty, sweet-tart Pink Lemonade. A palate-clearing fruit draw alongside a brighter, citrus-led option.
• Strawberry Edition — Combines the cool, ice-finished Strawberry Ice with the livelier, fizzy-sherbet Strawberry Sizzle. Two expressions of strawberry — one crisp, one tangy and energetic.
• Ultimate Edition — Pairs the sharp two-note Lemon & Lime with the smooth, sweet Blueberry Raspberry. The widest flavour contrast in the Named Edition range — crisp citrus against soft berries.
• Watermelon Edition — Combines the crisp Watermelon Ice with a softer, sweeter Watermelon Strawberry. A palate-clearing vs fruit-sweet pairing across two watermelon-based pods.

How to Use SKE 30K Pro Max Prefilled Pods

1. Remove the old pod set from the SKE 30K Pro Max by pulling it free from the mouthpiece end. Dispose of the spent pod and container responsibly.
2. Unpack the new pods — remove all seals, stickers, and protective caps from both the 1.8ml pod and the 8.2ml auto-refill container before connecting them.
3. Connect the container to the pod — press the 8.2ml container firmly onto the base of the 1.8ml pod and push until it clicks and locks securely into position.
4. Insert the assembled pod set into the SKE 30K Pro Max device, pushing until it clicks firmly into place.
5. Wait 20–30 seconds before your first draw to allow the coil to saturate fully with e-liquid from the container.
6. Inhale to activate — the device is draw-activated and requires no buttons. The 8.2ml container feeds the pod automatically; no action is required.
7. Replace when exhausted — when flavour intensity drops significantly or vapour production reduces noticeably, the pod set has been used. Remove it and insert the second pod set from the same pack. For Named Editions, twist the device mouthpiece at any point to switch to the other flavour pod.

Buying Tips (Avoid Common Mistakes)

• Check compatibility before buying: These pods are for the SKE 30K Pro Max only. Using them in a different device is not recommended and the pods will not function as intended.
• Single or Named Edition: If you know your preferred flavour, a Single Edition gives consistency. If you want variety or are trying flavours for the first time, a Named Edition lets you compare two in a single pack.
• Puff counts are estimates: Up to 30,000 puffs is a usage-dependent guideline. Longer draws and more frequent use will reduce the actual count. Treat the figure as a general guide.
• Always wait before the first draw: Fitting a pod and drawing immediately risks a dry or harsh first puff. Wait 20–30 seconds for the coil to prime.
• Store unused pods correctly: Keep unopened packs sealed and stored in a cool, dry location away from heat, light, and moisture.
• Do not attempt to open the containers: The 8.2ml auto-refill containers are sealed units. They are not designed to be opened or manually refilled.
• Check individual listings for flavour details: Each flavour and edition page contains a full taste description. Reading these before buying an unfamiliar flavour is recommended.
• Named Edition pod switching: In a Named Edition, you do not need to exhaust one flavour before accessing the other. Both pods are available from the start via the device's twist-to-switch mouthpiece.

Frequently Asked Questions

What are SKE 30K Pro Max Prefilled Pods?

SKE 30K Pro Max Prefilled Pods are replacement pod packs for the SKE 30K Pro Max device, containing SKE Crystal Original V2 nicotine salt. Each pack includes two 1.8ml prefilled pods and two 8.2ml auto-refill containers — 20ml total — providing up to 30,000 puffs per pack, usage dependent. Available in Single Editions (one flavour in both pods) and Named Editions (two flavours per pack). Compatible with the SKE 30K Pro Max only.

Are SKE 30K Pro Max Prefilled Pods compatible with other SKE devices?

No — SKE 30K Pro Max Prefilled Pods are exclusively compatible with the SKE 30K Pro Max device. They are not designed for any other SKE product or third-party hardware. The pod dimensions, auto-refill mechanism, and connector system are all specific to the SKE 30K Pro Max. Using these pods in a different device is not recommended and may cause damage to the pods and the device.

How many puffs do SKE 30K Pro Max Prefilled Pods provide?

Each pack provides up to 30,000 puffs in total — approximately 15,000 per pod set — usage dependent. These are estimates based on average draw length and frequency. Longer draws and more frequent use will reduce the actual count. For Named Edition packs, the 15,000 puffs per pod applies to each flavour independently, and you can switch between them freely throughout the pack.

What is included in a SKE 30K Pro Max pod pack?

Each SKE 30K Pro Max pod pack contains four components: two 1.8ml prefilled pods and two 8.2ml auto-refill containers. The 1.8ml pod is the unit that sits in the device and is vaped from directly; the 8.2ml container connects to the pod and feeds it automatically as the e-liquid is consumed. Both components for each pod set must be connected before inserting into the device. Total e-liquid across the pack is 20ml.

What is the difference between Single Editions and Named Editions?

A Single Edition loads both pod sets with the same flavour — up to 30,000 puffs of one consistent taste. A Named Edition loads each pod set with a different flavour, with the SKE 30K Pro Max's twist-to-switch mouthpiece allowing you to rotate between them. Each flavour in a Named Edition provides approximately 15,000 puffs (usage dependent). Both formats contain 20ml of SKE Crystal Original V2 nicotine salt and cost the same.

Do SKE 30K Pro Max Prefilled Pods contain nicotine?

Yes — all SKE 30K Pro Max Prefilled Pods contain SKE Crystal Original V2 nicotine salt at 20mg (2%). Nicotine is an addictive substance. These pods are for adult nicotine users only and require age verification at checkout. They are not suitable for non-smokers, pregnant women, or those with heart conditions, and must be kept out of reach of children and pets at all times.

Do I need to refill the SKE 30K Pro Max containers myself?

No — the 8.2ml containers are sealed auto-refill units that feed the 1.8ml pod automatically throughout use. No manual topping up, filling, or monitoring is required at any point. When the container is exhausted, the entire pod set is replaced. Do not attempt to open or manually refill the 8.2ml containers — they are sealed components not designed to be accessed.

How do I choose the best SKE 30K Pro Max pod flavour?

Start with the flavour style you generally prefer. Ice finishes (Cherry Ice, Watermelon Ice, Strawberry Ice) suit adult vapers who want a refreshing, palate-clearing close. Citrus options (Lemon & Lime, Pink Lemonade, Blue Razz Lemonade) suit those who prefer a sharper, more mouth-active draw. Berry options range from smooth (Blueberry Raspberry) to sour-candy (Blue Sour Raspberry). Named Editions let you sample a pairing before committing to a full Single Edition. Check individual flavour listings for full taste descriptions.

How long should I wait before using a new pod?

Wait 20–30 seconds after fitting a new pod set before drawing. This allows the built-in mesh coil to saturate fully with e-liquid from the auto-refill container. Drawing immediately on an unsaturated coil risks a dry, harsh, or burnt taste on the first puff. The same wait time applies to both the first pod set in a pack and the second when switching over.

Where can I buy SKE 30K Pro Max Prefilled Pods in the UK?

SKE 30K Pro Max Prefilled Pods are available from Vapourcore, a UK-based vape retailer stocking the complete range across all Single Edition and Named Edition flavours. All products are TPD compliant and meet UK MHRA regulatory requirements. Age verification is required at checkout and UK delivery is available on all orders.

What e-liquid formula do SKE 30K Pro Max Prefilled Pods use?

All SKE 30K Pro Max Prefilled Pods use SKE Crystal Original V2 nicotine salt at 20mg (2%) with a 50/50 VG/PG ratio. The nicotine salt formula is designed to deliver a smooth, efficient nicotine hit at 20mg with less throat harshness than freebase nicotine at the same strength. The 50/50 VG/PG ratio suits the MTL draw style and coil configuration of the SKE 30K Pro Max.

How does the auto-refill system work?

The 8.2ml container connects to the base of the 1.8ml pod before being inserted into the device. As the 1.8ml pod empties during use, the container automatically transfers more e-liquid into it — no user action required. This continues until the full 10ml per pod set has been consumed. Once the container is depleted and the flavour fades, the pod set is exhausted and should be replaced with the second pod set from the same pack.

How do I switch between flavours in a Named Edition pack?

In a Named Edition, both pod sets are fitted simultaneously during the initial setup. To switch between flavours, twist the mouthpiece on the SKE 30K Pro Max device in the indicated direction — this rotates the airflow from one pod to the other. Allow 1–2 draws after switching for the new flavour to establish fully. The switch does not require opening the device or removing any components.

How do I know when a pod set is exhausted?

The primary indicator is a noticeable drop in flavour intensity — when the taste fades significantly compared to when the pod set was fresh, the 8.2ml container has been depleted. A reduction in vapour production is also a reliable signal. Some SKE 30K Pro Max devices include an LED indicator to signal pod depletion. When the first pod set is exhausted, remove it and insert the second pod set from the pack.

Can I use SKE 30K Pro Max pods in other SKE devices?

No — SKE 30K Pro Max pods are device-specific and will not fit or function in other SKE products, including the SKE Crystal Pro Max and the SKE Crystal Switch 30K. Despite similar naming across the SKE range, the pod systems are not interchangeable. Always confirm the specific device compatibility when purchasing replacement pods to avoid purchasing the incorrect product.

Are SKE 30K Pro Max Prefilled Pods TPD compliant?

Yes — all SKE 30K Pro Max Prefilled Pods are fully TPD compliant and meet all UK MHRA regulatory requirements. Each pod set contains a maximum of 20mg (2%) nicotine salt, within UK legal limits. The products are sold by Vapourcore for adults aged 18 and over only, with age verification required at the point of purchase.

What is the VG/PG ratio in SKE 30K Pro Max pods?

SKE 30K Pro Max Prefilled Pods use a 50/50 VG/PG ratio — an equal balance of vegetable glycerine and propylene glycol. This balanced ratio is appropriate for the MTL draw style and built-in mesh coil of the SKE 30K Pro Max, producing a moderate vapour volume suited to the device's design. The 50/50 ratio is consistent across all flavours and editions in the SKE 30K Pro Max pod range.

How should I store SKE 30K Pro Max pods?

Store unused pod packs sealed and in a cool, dry location away from direct sunlight, heat, and high humidity. Nicotine and e-liquid quality can degrade when exposed to light, heat, or air over time. Avoid storing pods in vehicles or locations subject to significant temperature variation. All e-liquid must be kept out of reach of children and pets at all times.

How do SKE 30K Pro Max pods compare to standard single-use disposable vapes?

SKE 30K Pro Max pods offer significantly more e-liquid per pod set than a standard disposable vape — 10ml per pod set vs the 1–2ml typical of a single-use product. The device is reusable and only the pod sets are replaced. The auto-refill format means the user experience is similar to a disposable — no filling or coil management required — but at a higher capacity per unit. Check individual product listings for flavour-specific details.

Can I mix flavours between the two pods in a Named Edition?

The flavour pairing in a Named Edition is fixed at manufacture — each pod set contains its pre-assigned flavour and the contents cannot be changed once the pack is opened. The twist-to-switch function allows you to rotate between the two pre-assigned flavours but does not allow custom combinations. If you want a pairing not available in the Named Edition range, two separate Single Edition packs would need to be used consecutively rather than simultaneously.

Important Information

• TPD compliant — meets all UK MHRA regulatory requirements
• Contains nicotine — nicotine is an addictive substance. For adult nicotine users only. Age verification required.
• Not recommended for non-smokers, pregnant women, or those with heart conditions
• Keep out of reach of children and pets
• Store in a cool, dry location away from direct sunlight
• Compatible with SKE 30K Pro Max only — not for use with any other device
• Sealed auto-refill system — do not attempt to manually refill the containers
• For full returns information visit the Returns page