Blu MAX 6000 Prefilled Pod Kit

The Blu MAX 6000 Prefilled Pod Kit is a complete rechargeable vaping kit from blu — one of the UK's most established vaping brands. Each kit includes the 850mAh rechargeable device, one 2ml prefilled pod, and one 10ml refill container, delivering up to 6,000 puffs on 20mg nicotine salt. The kit features two power modes (Medium and High), a 3rd generation blu Flavour Tech dual mesh coil, and an LED display on the base showing battery status, active power mode, and child lock status simultaneously. USB-C charging — cable not included. Compatible with blu MAX 6000 pods only. Also commonly searched as blu bar max 6000.

Available Flavours — Blu MAX 6000 Prefilled Pod Kit

The Blu MAX 6000 Prefilled Pod Kit is available in three flavours. Each kit includes the device in the corresponding colour, one 2ml prefilled pod, and one 10ml refill container in that flavour. When the included pod set is exhausted, replace with any compatible blu MAX 6000 replacement pod — five flavours available as standalone pods.

• Blueberry Sour Razz — wild blueberry sweetness on the inhale, sour raspberry sharpening through the mid-draw, clean berry close. A vivid sweet-sour profile that alternates between the two notes across every draw. No cooling.
• Pineapple — tart, exotic pineapple from the first draw, developing a natural tropical sweetness through the mid-draw before closing with a clean, refreshing finish. Distinctly fruit-forward with no cooling element.
• Strawberry Ice — orchard-fresh strawberry on the inhale, deepening through the mid-draw, then a crisp menthol finish on the exhale. The strawberry and menthol are well-balanced — neither overriding the other. Medium cooling.

Replacement Pods — Five Flavours Available

When the pod set included with the kit runs out, replace with any compatible blu MAX 6000 replacement pod. Five flavours are available as standalone replacement pods at Vapourcore:

• Blueberry Sour Razz — sweet-sour berry combination, no cooling
• Pineapple — tart tropical fruit, no cooling
• Strawberry Ice — strawberry and menthol, medium cooling
• Blueberry Ice — sweet blueberry with a cool menthol finish
• Lemon & Lime — sharp citrus combination, no cooling

All replacement pods use the same 2ml pod and 10ml refill container format, delivering up to 6,000 puffs per set. Compatible with the blu MAX 6000 device only. Browse the full blu range at Vapourcore for all available blu products.

What Is the Blu MAX 6000 Prefilled Pod Kit?

The blu MAX 6000 is a rechargeable prefilled pod kit — not a disposable, and not a traditional open refillable device. It sits in the growing category of rechargeable pod systems that combine the convenience of a pre-filled format with the sustainability and running cost of a rechargeable battery.

Each kit contains everything needed to start vaping immediately: the 850mAh device, a 2ml prefilled pod already loaded with 20mg nicotine salt e-liquid in the chosen flavour, and a 10ml refill container that tops up the pod automatically during use. The 10ml container acts as a reservoir — as the 2ml pod draws down, the refill container replenishes it continuously, providing the full 6,000 puffs without any manual refilling. When both the pod and the container are fully depleted, the pod set is replaced as a single unit.

The device is draw-activated — inhale to vape, no fire button. The button on the base switches between power modes and manages the child lock. USB-C charging — any compatible USB-C cable works; cable not included in the box. For delivery options, visit our delivery and shipping page.

Dual Power Modes — Medium and High

The blu MAX 6000 is one of the few prefilled pod kits in its category to offer two distinct power modes. Both are available from the moment the kit is set up — switch at any time by pressing the button on the base of the device. The LED display confirms which mode is currently active.

Medium Mode delivers a lighter draw with less vapour output. Flavour is present but more restrained, and the 850mAh battery extends its charge for longer between top-ups. Medium Mode is suited to moderate, sustained use throughout the day when battery life is the priority.

High Mode pushes more power to the 3rd generation blu Flavour Tech dual mesh coil, intensifying the flavour profile and increasing vapour production. The characteristics of each flavour are at their most pronounced in High Mode — the sour-sweet contrast in Blueberry Sour Razz, the tart tropical depth of Pineapple, and the fruit-ice balance of Strawberry Ice are all more vivid. High Mode uses more battery per puff.

Both modes use the same 20mg nicotine salt delivery — mode selection affects flavour intensity and vapour output, not nicotine concentration.

The 3rd Generation Blu Flavour Tech Dual Mesh Coil

The blu MAX 6000 uses the blu Flavour Tech 3rd generation dual mesh coil — the official name confirmed by the manufacturer. Dual mesh means two heating surfaces rather than one, distributing heat more evenly across the e-liquid during each draw. More even heat distribution produces more consistent flavour output and a more accurate representation of each flavour profile across the full lifespan of the pod set.

The 3rd generation designation reflects iterative development over earlier blu coil generations — improved heat distribution and flavour delivery compared to previous versions. The coil is built into the 2ml prefilled pod and is replaced as part of the pod set when the e-liquid runs out — no separate coil replacement required.

What the LED Display Shows

The LED display on the base of the blu MAX 6000 shows three pieces of information simultaneously — a feature not clearly explained by most retailers:

• Battery status — shows the current charge level so you know when to connect a USB-C cable before the battery runs out mid-session
• Active power mode — confirms whether Medium Mode or High Mode is currently engaged so there is no guesswork about which mode is active
• Child lock status — shows whether the childproof safety lock is engaged or disengaged, preventing accidental activation

All three readings are visible at the same time on the single LED display located on the base of the device. The child lock and power mode are both managed via the button on the base.

Specifications

Product TypeComplete kit — device + first pod setKit Contents1 × 850mAh device + 1 × 2ml prefilled pod + 1 × 10ml refill containerKit FlavoursBlueberry Sour Razz / Pineapple / Strawberry IceBattery850mAh rechargeableChargingUSB-C — cable not includedLED DisplayBattery status / active power mode / child lock statusPower ModesMedium Mode / High ModeMode SwitchButton on base of deviceCoilblu Flavour Tech — 3rd generation dual meshNicotine20mg nicotine saltPod Capacity2ml prefilledRefill Container10ml (transparent — liquid level visible)Total E-Liquid12ml per pod setPuffsUp to 6,000 per pod setActivationInhale-activated (draw-activated)Vaping StyleMTL (Mouth-to-Lung)Child LockYes — childproof safety lockDimensions88mm × 44mm × 22mmWeight96gCompatible Podsblu MAX 6000 pods onlyManufacturerFontem Ventures BV (BAT subsidiary)MHRA00123-25-00210TPD CompliantYes

FAQs — Blu MAX 6000 Prefilled Pod Kit

What is the Blu MAX 6000 Prefilled Pod Kit?

The Blu MAX 6000 Prefilled Pod Kit is a complete rechargeable vaping kit from blu. Each kit includes the 850mAh device, a 2ml prefilled pod, and a 10ml refill container — 12ml of 20mg nicotine salt in total, delivering up to 6,000 puffs. It is not a disposable device. The battery is rechargeable via USB-C (cable not included) and compatible pods are replaced when the e-liquid runs out, not the device.

Is the Blu MAX 6000 the same as the blu bar max 6000?

The Blu MAX 6000 is sometimes searched as "blu bar max 6000" but these refer to the same product. The official product name from blu is "blu MAX 6000" — not "blu bar max 6000". The blu Bar is a separate disposable product line. The blu MAX 6000 is the rechargeable prefilled pod kit. Both search terms lead to the same device available at Vapourcore.

Does the Blu MAX 6000 come with a USB-C cable?

No. The USB-C charging cable is not included with the Blu MAX 6000 Prefilled Pod Kit. Any compatible USB-C cable charges the 850mAh battery. The LED display on the base of the device shows battery status at all times, so you can monitor charge level and connect a cable before the battery runs out. This is worth noting before purchase to avoid any inconvenience.

What flavours does the Blu MAX 6000 kit come in?

The Blu MAX 6000 Prefilled Pod Kit is available in three flavours: Blueberry Sour Razz, Pineapple, and Strawberry Ice. Each kit includes the device in the corresponding colour and a pod set in that flavour. Five additional flavours — including Blueberry Ice and Lemon & Lime — are available as standalone replacement pods.

What is the difference between Medium Mode and High Mode?

Medium Mode delivers a lighter draw with less vapour and conserves the 850mAh battery for longer use between charges. High Mode pushes more power to the 3rd generation dual mesh coil, intensifying flavour and increasing vapour production — the preferred mode when maximum flavour output is the priority. Switch between modes at any time by pressing the button on the base. The LED display confirms which mode is active.

How do I switch between power modes on the Blu MAX 6000?

Press the button on the base of the device to switch between Medium Mode and High Mode. The LED display on the base confirms which mode is currently active immediately after switching. The same button also manages the childproof safety lock. There is no fire button — the device is draw-activated for vaping. The mode button on the base is only for mode switching and the child lock.

How do I know which mode the Blu MAX 6000 is in?

The LED display on the base of the device shows the active power mode at all times — alongside battery status and child lock status simultaneously. There is no need to guess or count button presses. Check the LED display on the base whenever you want to confirm whether Medium Mode or High Mode is currently engaged.

How do I turn the child lock on and off?

The childproof safety lock on the Blu MAX 6000 is engaged and disengaged via the button on the base of the device. The LED display on the base shows child lock status at all times, so you can confirm whether the lock is active without pressing anything. When the child lock is engaged, accidental activation of the device is prevented. The device is inhale-activated for vaping — the child lock prevents unintended draws.

How many puffs does the Blu MAX 6000 give?

Up to 6,000 puffs per pod set from the combined 2ml prefilled pod and 10ml refill container — 12ml of 20mg nicotine salt in total. Actual puff count depends on draw length, frequency of use, and the active power mode; High Mode uses more power per puff and may reduce the total count. When the pod set is depleted, replace with a compatible blu MAX 6000 replacement pod in any of the five available flavours.

What pods are compatible with the Blu MAX 6000?

The Blu MAX 6000 is compatible with blu MAX 6000 replacement pods only. Five flavours are available as replacement pods: Blueberry Sour Razz, Pineapple, Strawberry Ice, Blueberry Ice, and Lemon & Lime. No other blu products — including blu Bar, myblu, or previous blu pod generations — are compatible with this device. Using non-compatible pods with this device is not recommended.

How long does the 850mAh battery last on the Blu MAX 6000?

Battery life on the 850mAh battery depends on usage frequency and the active power mode. High Mode uses more power per draw than Medium Mode, which reduces time between charges. For all-day moderate use, Medium Mode extends battery life; for sessions where flavour intensity is the priority, High Mode is suited to shorter, more intensive use. The LED display shows battery status at all times so you can charge before running out.

How do I set up the Blu MAX 6000?

Setting up the Blu MAX 6000 takes four steps. Remove all packaging from the kit. Insert the 2ml prefilled pod into the 10ml refill container until it clicks securely. Insert the combined pod and container assembly into the device. Inhale through the mouthpiece — the device is draw-activated and will begin vaping immediately. No fire button. No coil priming required. The device is ready to use straight from the box once assembled.

Is the Blu MAX 6000 good for beginners?

The Blu MAX 6000 suits adult vapers who want a rechargeable kit without the complexity of an open-system device. The prefilled pod format removes the need to handle loose e-liquid. Draw activation means there is no fire button to learn. The LED display provides clear information on battery, mode, and child lock at all times. The two power modes add flexibility without requiring technical knowledge — Medium or High, selected by a single button press.

Who makes the Blu MAX 6000?

The Blu MAX 6000 is made by Fontem Ventures BV, a subsidiary of British American Tobacco (BAT). blu is one of the UK's most established vaping brands, with a long track record in the UK vape market. The blu MAX 6000 is MHRA notified under Fontem Ventures BV (registration 00123-25-00210) and is fully UK TPD compliant. Genuine blu stock at Vapourcore is supplied direct from authorised channels.

Is the Blu MAX 6000 TPD compliant?

Yes. The Blu MAX 6000 Prefilled Pod Kit is UK TPD compliant and MHRA notified under Fontem Ventures BV (registration 00123-25-00210). The 2ml prefilled pod capacity and 20mg nicotine salt formulation comply with UK Tobacco and Related Products Regulations. All blu MAX 6000 stock at Vapourcore is genuine Fontem Ventures product.

Delivery and Returns

Vapourcore delivers across the UK. For full information on delivery options, timescales, and costs, visit the delivery and shipping page. For information on our returns policy, visit the returns page. For other rechargeable prefilled pod kit options, browse the prefilled pod vape kits collection.

Important Information

• UK TPD compliant — MHRA notified (Fontem Ventures BV, 00123-25-00210)
• Contains 20mg nicotine salt — nicotine is addictive
• Not suitable for non-smokers, those who have never vaped, or people who are pregnant
• If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
• Keep out of reach of children and pets
• USB-C charging cable not included — any compatible USB-C cable works
• Compatible with blu MAX 6000 pods only — no other pods fit this device