Voopoo Drag S3 Vape Kit

The Voopoo Drag S3 is a powerful yet easy-to-use pod mod designed to suit MTL, RDTL and DTL vaping styles in one compact device. A high-capacity 3000mAh battery (charges in about 1.5 hours) is paired with the GENE T.T 2.0 chipset for fast firing, smart coil detection and reliable power delivery across 5–60W. The bright 0.96-inch TFT screen, inhale activation, adjustable airflow and a TPD-compliant 2ml pod make this an ideal upgrade for vapers who want more performance without the faff.

Whether you prefer a tight, cigarette-like draw with nic salts or an airier, flavour-forward vape with lower-resistance coils, the Drag S3 has you covered. It’s compatible with the full PnP X coil platform, supports Smart and ECO modes, and features a fingerprint locking system for quick, secure access. Expect robust construction, pocket-friendly ergonomics and excellent flavour—day in, day out.

Key Features & Benefits

• 3000mAh Battery — long-lasting power; typical users can enjoy up to a full day of vaping per charge, heavy users get dependable endurance.
• Fast USB-C Charging — approximately 1.5 hours from low to full.
• 5–60W Output — tune power to match your coil and preferred draw.
• MTL, RDTL & DTL in one device — adjust airflow and choose the right PnP X coil.
• Inhale Activation — just puff to vape; button control also available via the GENE T.T 2.0 chipset.
• Smart & ECO Modes — Smart auto-sets wattage for your coil; ECO extends battery life when you need it.
• 0.96? TFT Screen — clear power, puff and battery readouts at a glance.
• Fingerprint Locking — quick, secure access and unintended-fire prevention.
• Adjustable Airflow — fine-tune from tight MTL to open DTL.
• 2ml Side-Fill Pod (TPD compliant) — clean, convenient refills.
• Full PnP X Coil Compatibility — broad choice for flavour and vapour.
• 50/50 E-Liquid Friendly — works great with 50% VG e-liquids; see pairing guide below.

Technical Specifications

• Battery: 3000mAh (internal, rechargeable)
• Charging: USB Type-C (approx. 1.5 hours, cable not always included – see box contents)
• Output Power: 5–60W (Smart & ECO modes)
• Activation: Inhale activation + chipset control
• Chipset: GENE T.T 2.0
• Display: 0.96" TFT screen
• Airflow: Adjustable (MTL ? DTL)
• Pod Capacity: 2ml (TPD-compliant, side-fill)
• Coils: Compatible with all PnP X coils (sold separately)
• E-Liquid: 50% VG recommended for MTL/RDTL; see pairing guide for DTL options

Design & Build Quality

The Drag S3 balances durability and comfort with a premium finish and ergonomic shaping for a secure grip. The TFT display is bright and legible indoors and out, while the simplified UI makes power adjustments and mode selection quick and intuitive. A tactile airflow control ensures you can dial in your draw precisely. The integrated fingerprint lock adds a useful layer of security without slowing you down.

PnP X Coil Platform: Which Coil for Which Style?

The Drag S3 supports the complete PnP X coil family, giving you the flexibility to vape how you like:

• Higher-resistance coils (e.g., 0.6?–1.0?): Best for MTL with 50/50 e-liquids, including nic salts (10–20mg). Expect cooler vapour, tighter draw and great throat hit at lower wattages.
• Mid-range coils (e.g., 0.3?–0.5?): Great for RDTL with 50/50 or blended ratios. Balanced flavour and vapour at moderate wattages.
• Lower-resistance coils (e.g., ?0.2?): Suited to DTL at higher wattages. For best wicking, many users prefer 60–70% VG freebase e-liquids; start low on wattage and work up.

Tip: Use Smart mode to auto-set a safe wattage for your coil, then fine-tune to taste.

Coil Lifespan & Running Cost (Estimator)

Coil life depends on wattage, e-liquid sweetness and puff frequency. As a rough guide:

• Light/Moderate use: ~2–3 weeks per coil
• Heavy use: ~1–2 weeks per coil

Example cost estimate: If a coil costs £3.99 and lasts two weeks, that’s roughly £8 per month in coils. Actual costs vary by usage.

Battery Performance & Charging

The integrated 3000mAh cell prioritises practical, all-day performance. Most MTL/RDTL vapers can expect a full working day (and often more) between charges; DTL at higher wattages will reduce runtime accordingly. When it’s time to top up, USB-C charging brings the device back to full in around 1.5 hours. Use ECO mode to extend life when the battery is running low.

Vaping Styles: MTL, RDTL & DTL

Fine-tune your vape in three steps:

1. Choose a coil to match your preference (see PnP X guide above).
2. Set airflow — tighter for MTL, more open for DTL.
3. Adjust wattage (or use Smart mode) to sit within the coil’s recommended range.

For cigarette-like MTL with nic salts, pick a higher-resistance coil, 50/50 e-liquid and a tighter airflow. For flavour-rich RDTL/DTL with freebase, open the airflow and select a lower-resistance coil at a suitable wattage.

E-Liquid Pairing Guide

• Nic Salts (10–20mg), 50/50 VG/PG: Best with higher-resistance PnP X coils for MTL or tighter RDTL.
• Freebase (3–6mg), 60–70% VG: Pair with lower-resistance PnP X coils for airy RDTL/DTL at higher wattages.
• Flavour notes: Fruity and dessert flavours shine on mesh coils; menthol/ice variants offer a crisper throat hit at modest wattages.

Explore our e-liquid range or stock up on PnP X coils for your preferred style.

Installation & Quick Start

1. Prime the coil (if replaceable) with a few drops of e-liquid on the cotton.
2. Fill the pod via the side-fill port and allow 5–10 minutes for saturation.
3. Insert the pod until it clicks and ensure a snug fit.
4. Power/wake the device and select Smart mode for easy setup.
5. Adjust airflow for MTL/RDTL/DTL and take a few short primer puffs.
6. Fine-tune wattage to your taste within the coil’s recommended range.

Tip: If flavour drops off or tastes muted, refill before the pod is completely empty and replace the coil when needed.

Drag S3 vs X3 vs H40 (Quick Comparison)

Looking for more power or a smaller form factor? Compare with Drag X3.

What’s in the Box

• 1 x Voopoo Drag S3 Device (3000mAh)
• 1 x 2ml Side-Fill Pod
• 1 x Compatible PnP X Coil (pre-installed or boxed)
• 1 x Spare PnP X Coil
• 1 x USB Type-C Cable (where included)
• 1 x User Manual

Delivery, Returns & Warranty

• Free UK Delivery on orders over £20
• Same-Day Dispatch on orders placed before 3pm (Mon–Fri)
• Hassle-Free Returns within our returns window — see policy
• Warranty: Device covered against manufacturing faults (see T&Cs)

Delivery Info  |  Returns Policy  |  Warranty

Why Choose the Drag S3?

• Versatility: MTL, RDTL and DTL in one device—no need to buy multiple kits.
• All-day battery: 3000mAh keeps you vaping from morning to night on a single charge.
• Smart technology: GENE T.T 2.0 chipset auto-detects coils and optimises wattage.
• Coil choice: Full PnP X compatibility means endless flavour and vapour options.
• User-friendly: Touchscreen, inhale activation and clear display make it beginner-friendly yet powerful.
• Premium build: Durable construction with ergonomic design for comfortable, all-day carry.
• Fast charging: 1.5-hour USB-C charge keeps downtime minimal.

Why Choose Vapourcore

• Authorised UK Retailer — 100% genuine stock
• Expert Support — friendly UK team, helpful advice
• Rewards — earn points on every order
• Great Value — bundle offers and multipack savings
• Fast, Reliable Delivery — trackable services nationwide

Frequently Asked Questions

How long does the Drag S3 battery last?

Battery life depends on wattage and coil resistance. Many MTL or moderate RDTL users get a full day per charge; DTL at higher wattages will shorten runtime.

How fast does it charge?

With USB-C, the Drag S3 typically charges in about 1.5 hours from low to full.

Which PnP X coils are compatible?

The Drag S3 is compatible with the entire PnP X range. Choose higher resistance for MTL (with 50/50 e-liquid) and lower resistance for airier RDTL/DTL (often 60–70% VG freebase).

Can I use nic salts?

Yes. Nic salts (10–20mg, 50/50) pair best with higher-resistance PnP X coils and a tighter airflow for an MTL draw.

Does it leak?

The side-fill 2ml pod is designed to minimise leaks. Always seat the fill plug firmly, keep the pod at least one-third full, and replace coils when flavour drops.

How do I avoid burning coils?

Prime the coil, let the filled pod sit for 5–10 minutes before first use, start at the lower end of the coil’s wattage range, and avoid chain-vaping at very high power.

What e-liquid works best?

For MTL or tighter RDTL, choose 50/50 e-liquids (nic salts or lower-strength freebase). For DTL at higher wattage, many users prefer 60–70% VG freebase (3–6mg).

Is the Drag S3 suitable for beginners?

Yes. Smart mode, inhale activation and clear on-screen guidance make it straightforward to set up and use, with room to grow into RDTL/DTL as you wish.

Conclusion

The Voopoo Drag S3 delivers a superb balance of power, flexibility and everyday convenience. With its 3000mAh battery, Smart/ECO modes, full PnP X coil support and precise airflow control, it’s an excellent choice for MTL, RDTL and DTL alike. If you want great flavour, simple operation and reliable performance in a premium pod mod, the Drag S3 is ready to go.

Flavour & Accessory Picks (Optional)

• PnP X Replacement Coils — stock up for your preferred style
• E-Liquids — 50/50 for MTL; 60–70% VG for DTL
• Voopoo Drag X3 — compare alternatives

TPD-compliant 2ml pod capacity. You must be 18+ to purchase this product. Vape products contain nicotine which is a highly addictive substance; only use if you are a current smoker or vaper. Always follow user and safety instructions.