Vaporesso XROS 6 Pod Vape Kit

The Vaporesso XROS 6 Pod Vape Kit is a refillable pod vape kit built around four flagship technologies: VENTURI Airflow — an industry-first fluid-dynamics system for a quieter, smoother inhale; COREX 3.0 — the advanced mesh coil delivering improved flavour output in every pod; SSS 2.0 — second-generation thermal and structural leak-resistant technology; and 60s Smart Prime — the device tells you when the coil is ready, in 60 seconds. Powered by a 1800mAh battery with 30W output. Draw-activated, no buttons. UK/TPD 2ml pods. Available in 11 colours. UK TPD compliant, MHRA registered. Browse the full Vaporesso range at Vapourcore.

18+ only. This is a refillable vape device — no nicotine or e-liquid is included.

1800mAh Battery — 5 Days Use, 10 Minutes to a Full Day’s Charge

10 minutes of 3A fast charging delivers a full day of use — confirmed by Vaporesso Lab. That is the most useful battery claim on any pod kit in the UK right now, and it changes how you think about charging. A coffee break is enough. Leave the house on a topped-up charge in the morning and the XROS 6 carries through a full day without needing a socket.

On a full charge, the XROS 6 runs for up to 5 days at standard use. It also reaches 50% battery in 10 minutes, so even a brief top-up translates into meaningful use time. Most pod kits require 45–60 minutes to charge meaningfully — the XROS 6’s 3A charging (DC 9V/2A, 5V/3A via USB-C) is a genuine advantage in daily use. The 0.88” TFT screen shows the battery level at a glance. USB-C cable is included in the box.

60s Smart Prime — Ready in One Minute

Coil priming matters. When a new pod is filled with e-liquid, the cotton inside needs time to absorb the liquid fully before the first draw. Skip this step and the result is a dry hit — an unpleasant burnt taste that can permanently damage the mesh coil and requires a pod replacement. Standard pod kits leave vapers to time this manually, usually waiting 5–10 minutes and hoping.

The XROS 6 handles this differently. After filling, the device displays a 60-second prompt and notifies you directly when the coil is saturated and ready to vape . No counting, no guesswork, no wasted pods. Fill it, wait for the prompt, vape. For new vapers making the switch from disposables, 60s Smart Prime removes one of the most common first-time mistakes. For experienced vapers, it removes one of the most repetitive ones. Browse the full range of refillable pod vape kits at Vapourcore.

VENTURI Airflow — The Industry’s First Fluid-Dynamics Airflow

Standard adjustable airflow on a pod kit works by mechanically opening or closing a port — more air in, or less. The VENTURI Airflow System on the XROS 6 takes a different approach: it optimises the airflow path itself using fluid dynamics principles. The result is a quieter draw with noticeably less resistance and a more natural inhale feel than standard airflow designs produce.

No other pod kit on the market currently uses VENTURI Airflow — it is an industry-first technology and the key hardware reason the XROS 6 stands apart from the XROS 5 and XROS 6 Mini. The adjustable side slider moves continuously from tight MTL — a restricted, cigarette-like draw suited to nicotine salts — through to open RDL for a looser draw with more vapour. For delivery options visit the Delivery & Shipping page.

COREX 3.0 — Improved Flavour, Smoother Draw

Every Vaporesso XROS pod is built on COREX 3.0 coil technology — three components working together inside the pod cartridge.

• Hive Mesh Structure — a larger, more evenly distributed heating surface than a traditional round-wire coil, producing more consistent heat across the e-liquid.
• Nano-Microfiber Process — improved e-liquid absorption into the wicking material, feeding the coil evenly on every draw.
• Aerospace Grade cotton — clean, consistent wicking without breaking down under repeated heating cycles.

Together, these deliver improved flavour output and a smoother draw compared to the previous COREX generation. Flavour is consistent from the first draw to the last of the pod’s life. The mesh structure handles both 50/50 and higher-VG e-liquids without performance loss — a versatile coil across vaping styles. COREX 3.0 is compatible with both 50/50 and higher-VG e-liquids depending on the resistance chosen. Order XROS COREX 3.0 replacement pods separately at Vapourcore.

SSS 2.0 Leak-Resistant Technology

The original SSS system used thermal leak-prevention design to reduce leaking caused by heat and temperature changes. SSS 2.0 adds a second layer: improved structural sealing that works alongside the thermal protection. The XROS 6 is built to live in a bag or pocket without creating mess — for travel, commutes, or simply everyday carry. The XROS 6 carries clean. For best results, carry the device upright.

Compatible Pods & E-Liquid Guide

The XROS 6 is compatible with all Vaporesso XROS Series pod cartridges — full backwards compatibility with every previous XROS generation. The two pods included cover the main vaping styles:

For the closest experience to a cigarette: 0.8Ω pod, 20mg nicotine salt, airflow slider to its tightest position. For a looser, higher-vapour draw: 0.6Ω pod with lower-strength freebase. Order Vaporesso XROS Series replacement pods (4-pack) at Vapourcore.

Vaporesso XROS 6 Specifications

Vaporesso XROS 6 vs XROS 5 vs XROS 6 Mini

For existing XROS users or buyers comparing the range, here is how the three current devices sit.

All three devices share XROS pod compatibility — switching devices does not require buying new pods. The XROS 6 adds VENTURI Airflow, SSS 2.0, 60s Smart Prime, and the largest battery of the three. The Vaporesso XROS 6 Mini suits those who prefer a more compact form factor.

What’s in the Box

• 1x Vaporesso XROS 6 device
• 1x 0.6Ω COREX 3.0 Mesh Pod 2ml (pre-installed)
• 1x 0.8Ω COREX 3.0 Mesh Pod 2ml (spare)
• 1x Type-C USB charging cable
• 1x user manual + warranty card

Available in 11 colours — select above.

Frequently Asked Questions

What is VENTURI Airflow on the Vaporesso XROS 6?

VENTURI Airflow is Vaporesso’s fluid-dynamics airflow system, developed exclusively for the XROS 6. Rather than simply restricting or opening the airflow path, VENTURI optimises the airflow route itself — reducing draw resistance and noise. The result is a quieter, more natural inhale. The adjustable side slider moves from tight MTL to open RDL. No other pod kit currently uses this technology.

How does 60s Smart Prime work on the XROS 6?

After filling the XROS 6 pod with e-liquid, the device displays a 60-second countdown and notifies you when the coil is fully saturated. Vape as soon as the prompt clears — no manual timing required. This prevents dry hits caused by under-primed coils, which permanently damage the mesh and produce an unpleasant burnt taste. Standard pod kits require users to wait and guess.

How long does the XROS 6 battery last?

Up to 5 days on a single charge at standard use. More usefully for daily life: 10 minutes of 3A fast charging delivers a full day of use, confirmed by Vaporesso Lab. The XROS 6 also reaches 50% charge in 10 minutes. The 0.88″ TFT screen shows remaining battery level. USB-C cable is included in the box.

What pods are compatible with the Vaporesso XROS 6?

All Vaporesso XROS Series pod cartridges are compatible with the XROS 6 — full backwards compatibility across every XROS generation. Two pods are included in the box: a 0.6Ω pod (pre-installed, suited to RDL vaping) and a 0.8Ω pod (spare, suited to MTL or MTL/RDL crossover). Replacement XROS pods are available separately at Vapourcore.

What is the difference between the XROS 6 and the XROS 6 Mini?

The XROS 6 has a 1800mAh battery, 30W output, VENTURI Airflow, SSS 2.0 leak tech, and 60s Smart Prime. The XROS 6 Mini has a 1600mAh battery, 18W output, standard adjustable airflow, and a smaller, lighter form factor. Both use COREX 3.0 pods and share the same XROS pod ecosystem. Choose XROS 6 for battery performance and VENTURI; choose Mini for compact carry.

What e-liquid should I use in the Vaporesso XROS 6?

It depends on the pod fitted. The 0.6Ω pod (pre-installed) suits a looser RDL draw — use 3–6mg freebase in a 50/50 or higher-VG blend. The 0.8Ω pod (spare) is the more versatile option — works with 50/50 freebase at 3–6mg or nicotine salts at 10–20mg. For the closest draw to a cigarette, pair the 0.8Ω with 20mg nicotine salt and set the airflow slider to its tightest position.

Important Information

• UK TPD compliant — MHRA registration: 01110-26-10006
• Refillable device — no nicotine, e-liquid, or pods included
• 18+ only
• If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
• Keep out of reach of children
• Charge on a fire-safe surface — do not leave charging overnight unattended
• Store away from extreme heat and direct sunlight
• Compatible with Vaporesso XROS Series pods only
• USB-C cable included
• See our Returns policy for eligibility