OXVA Vprime 2 Vape Kit

The OXVA Vprime 2 Vape Kit is the upgraded successor to the original Vprime — one of the first pod kits to make auto-draw DTL vaping feel genuinely responsive. The Vprime 2 introduces BOOST and ECO dual power modes, Ultra-Auto Draw activation, Rapid Charge via USB-C, and a 0.98-inch Dynamic Smart Screen, delivering up to 60W of output from a device that covers Direct to Lung, Restricted Direct to Lung, and Mouth to Lung vaping in a single kit. Compatible with both freebase and nicotine salt e-liquids. The 2ml TPD-compliant pod capacity and dual activation — inhale or button — carry forward from the original, now refined across every aspect of the system. Browse the full OXVA range at Vapourcore.

BOOST Mode vs ECO Mode — Which Setting and When

The Vprime 2 replaces the original Vprime's 5–60W manual wattage slider with two purpose-built modes: BOOST and ECO. Both modes use the same device, the same pods, and the same 60W maximum ceiling — the difference is in how and when each one is the right choice.

BOOST mode fires the Vprime 2 at maximum output — up to 60W — through the Unitech mesh coil. The result is the densest flavour, largest cloud production, and most intense DTL draw the device can produce. BOOST is the setting for vapers who want the full performance ceiling of the Vprime 2: at home, near a charger, chasing maximum taste, or running full DTL cloud sessions with a 0.2Ω pod.

ECO mode reduces the output to extend battery life significantly. The draw is lighter and vapour production is lower, but the flavour character of the e-liquid remains present. ECO is the setting for all-day carry when charging is inconvenient, for travel, for sessions that lean toward RDL rather than full DTL, or for vapers who want to make a charge last longer across a full day.

Switching between BOOST and ECO is straightforward, and the 0.98-inch Dynamic Smart Screen confirms which mode is active at all times. The practical way to use the Vprime 2: BOOST at home or when charging is nearby, ECO when away. The same 60W kit, two meaningfully different experiences.

Ultra-Auto Draw — What the Upgrade Delivers

The original Vprime was among the first pod kits to offer auto-draw DTL vaping — its sensor fired fast enough to match button activation speed. The Vprime 2 upgrades this to Ultra-Auto Draw: a refined and more precise auto-draw system built on OXVA's experience with the original Vprime sensor.

In practice, Ultra-Auto Draw on the Vprime 2 means inhaling on the 0.2Ω pod in BOOST mode fires the kit at the same instant as a button press — with improved consistency and sensor responsiveness across the draw. No pre-draw delay, no hesitation, no compromise. This is what makes DTL vaping from a pod kit work: the device fires when the inhale begins, every time.

Both activation methods remain available — Ultra-Auto Draw for hands-free DTL draws, and the button for those who prefer physical control. Either way, the Vprime 2 fires at full 60W BOOST output in the same instant. Browse all compatible OXVA Vprime replacement pods at Vapourcore.

0.98-Inch Dynamic Smart Screen

The original Vprime's 0.96-inch colour screen offered three animated 3D themes — Space Boy, Rocket Launch, and Cosmic Journey — as its display interface. The Vprime 2 upgrades to a 0.98-inch Dynamic Smart Screen: a larger display with an updated, more responsive interface that reflects the device's active state rather than running fixed animations.

The Dynamic Smart Screen displays the active mode — BOOST or ECO — battery level, and key device information at a glance. With the Vprime 2's two-mode system, the screen's primary function is confirming exactly what the device is doing at any moment: which mode is active, how much charge remains, and when a top-up is needed. No guesswork, no navigating menus — the screen gives a complete picture in a single glance.

Rapid Charge — Upgraded Charging Speed

The original Vprime charged at 5V/2A via USB-C — a capable charge speed for its time. The Vprime 2 upgrades to Rapid Charge, a faster USB-C charging system that reduces charge time compared with the original Vprime's 5V/2A input (manufacturer-rated).

In practical terms, Rapid Charge means shorter plugged-in windows between sessions. The 0.98-inch Dynamic Smart Screen displays battery level in real time, so it is always clear when a charge is approaching and when the battery is ready. In ECO mode, the Vprime 2's battery extends significantly further per charge than in BOOST mode — switching to ECO when the battery is lower is the most effective way to manage charge across a full day without reaching for a cable. For delivery information, visit our delivery and shipping page.

Vprime 2 vs Original Vprime — What Changed

Two buyer groups search for the Vprime 2: those upgrading from the original, and those choosing between the two. This comparison covers both.

• Screen: 0.96-inch with three static animated 3D themes → 0.98-inch Dynamic Smart Screen with a more responsive, mode-confirming interface.
• Power system: 5–60W manual wattage slider → BOOST and ECO dual fixed modes. No slider on the Vprime 2 — the modes replace the need to navigate wattage.
• Auto-draw: Standard auto-draw, 0.01s firing → Ultra-Auto Draw with improved sensor precision and consistency.
• Charging: 5V/2A Type-C → Rapid Charge USB-C — meaningfully faster charge input.
• Battery: 2600mAh built-in (V1) → built-in rechargeable with upgraded charging speed via Rapid Charge.
• Maximum output: 60W — unchanged across both generations.

Who should upgrade: Original Vprime owners who want mode simplicity over wattage control — BOOST and ECO are a cleaner system than a manual slider for most daily use patterns. Faster charging and the improved Dynamic screen are meaningful quality-of-life upgrades for everyday carry. Who should stay on the original: vapers who specifically want granular wattage adjustment from 5W upward — the Vprime 2 does not offer a manual slider.

Pods — DTL, RDL, and MTL From One Device

The Vprime 2 uses the OXVA Vprime pod range — the same pod system as the original Vprime, covering all three vaping styles from a single compatible device. Two pods are included in the box. The full pod range spans 0.2Ω, 0.4Ω, 0.6Ω, and 0.8Ω — each suited to a different draw style and e-liquid type.

The 0.2Ω pod delivers full DTL vaping in BOOST mode — open draw, maximum cloud production, most intense flavour. Use with lower-strength freebase e-liquid. The 0.4Ω and 0.6Ω pods move toward RDL — warmer and airier than the 0.8Ω, cooler and tighter than the 0.2Ω. Nicotine salts and 50/50 freebase both suit these resistances well. The 0.8Ω pod gives a tight MTL draw, well suited to nicotine salts at 10mg or 20mg and 50/50 freebase e-liquids in ECO mode.

All pods use top-fill design and a five-layer leak-proof structure. Pod capacity is 2ml for UK TPD compliance. Unitech mesh coil technology carries forward from the original Vprime — delivering more flavour, more vapour, and extended coil life over standard mesh. For vapers seeking a dedicated MTL pod kit, the OXVA NeXLIM 2 is an alternative worth considering. Browse all refillable pod vape kits at Vapourcore.

Specifications

What's in the Box

• 1x OXVA Vprime 2 device
• 1x OXVA Vprime pod (pre-installed)
• 1x OXVA Vprime pod (spare)
• 1x USB-C cable
• 1x User manual

Frequently Asked Questions

What is the OXVA Vprime 2 Vape Kit?

The OXVA Vprime 2 is the upgraded successor to the original Vprime — one of the first pod kits to make auto-draw DTL vaping feel genuinely responsive. The Vprime 2 introduces a 0.98-inch Dynamic Smart Screen, BOOST and ECO dual power modes, Ultra-Auto Draw activation, and Rapid Charge. It delivers 60W maximum output and covers DTL, RDL, and MTL vaping styles with both freebase and nicotine salt e-liquids.

What is the difference between BOOST mode and ECO mode?

BOOST mode fires the Vprime 2 at maximum output — up to 60W — for the most intense flavour and cloud production from every draw. ECO mode reduces the output to conserve battery life, extending the time between charges significantly. Switch between modes via the device controls. The 0.98-inch Dynamic Smart Screen confirms which mode is active at all times.

What is Ultra-Auto Draw on the Vprime 2?

Ultra-Auto Draw is OXVA's upgraded auto-draw activation system on the Vprime 2. The original Vprime's sensor fired fast enough to match button activation speed. The Vprime 2's Ultra-Auto Draw refines this with improved sensor precision and consistency, allowing true DTL vaping on inhale alone — no button press needed — at full 60W BOOST output.

What is the battery capacity of the OXVA Vprime 2?

The Vprime 2 features a built-in rechargeable battery. Rapid Charge via USB-C recharges the battery faster than the original Vprime's 5V/2A input (manufacturer-rated). In ECO mode, battery life extends significantly per charge. The battery is built-in and not replaceable.

What pods are compatible with the Vprime 2?

The Vprime 2 is compatible with the OXVA Vprime pod range — the same pod system as the original Vprime. Two pods are included in the box. The full pod range covers 0.2Ω (DTL), 0.4Ω, 0.6Ω (RDL), and 0.8Ω (MTL). All pods use top-fill design, Unitech mesh coil technology, and a five-layer leak-proof structure. 2ml capacity for UK TPD compliance.

Can I use nic salts in the OXVA Vprime 2?

Yes. The Vprime 2 is compatible with both freebase and nicotine salt e-liquids. The pod range covers 0.2Ω (DTL) through to 0.8Ω (MTL), where nic salts and 50/50 freebase e-liquids suit the tighter resistance options. The 0.2Ω DTL pod is better suited to lower-strength freebase e-liquids — the open draw and high output are less suited to 20mg nicotine salt.

How is the Vprime 2 different from the original Vprime?

Key upgrades: the screen grows from 0.96 to 0.98 inches and becomes a Dynamic Smart Screen. Adjustable wattage (5–60W) is replaced by BOOST and ECO fixed modes. Auto-draw upgrades to Ultra-Auto Draw with improved sensor precision. Charge speed increases to Rapid Charge. The 60W maximum output remains the same across both generations.

What vaping styles does the Vprime 2 support?

The OXVA Vprime 2 covers Direct to Lung (DTL), Restricted Direct to Lung (RDL), and Mouth to Lung (MTL) vaping. The 0.2Ω pod delivers open DTL vaping at BOOST mode output. Higher resistance pods (0.6Ω and 0.8Ω) deliver RDL and MTL draws at lower wattage — well suited to ECO mode. Dual activation (Ultra-Auto Draw and button) suits all three draw styles.

Does the OXVA Vprime 2 come with a USB-C cable?

Yes, a USB-C cable is included in the box with the Vprime 2. The Vprime 2 charges via USB-C with Rapid Charge technology — faster than the original Vprime's 5V/2A input. The 0.98-inch Dynamic Smart Screen displays battery level at all times so it is always clear when a charge is needed.

What is the OXVA Vprime 2's wattage range?

The OXVA Vprime 2 delivers a maximum of 60W output. Unlike the original Vprime's continuous 5–60W manual slider, the Vprime 2 uses BOOST and ECO modes to deliver its output. BOOST mode fires at or near the 60W maximum for cloud and flavour performance. ECO mode reduces output to extend battery life. No manual wattage slider is present on the Vprime 2. For return queries, visit our returns page.

Important Information

• For use by adults aged 18 and over only
• Keep out of reach of children and pets
• Contains a built-in rechargeable battery — charge using the supplied USB-C cable and a compatible adaptor only
• Refillable device — use with compatible OXVA Vprime pods and appropriate e-liquids only
• Not suitable for use with incompatible pods or e-liquids
• UK TPD compliant