Orca Vape San Dynasty Pro Pod Kit

The Orca Vape San Dynasty Pro Pod Kit is a refillable pod kit built from CNC machined aluminium alloy, powered by a replaceable INR 16500 1,500mAh battery, and delivering up to 30W of adjustable output through a smart auto-wattage system. A 0.42 inch TFT colour display shows wattage, battery level, and coil resistance at all times. Two mesh coil pods are included in the box — a 0.6Ω pod for a warmer RDL draw and a 0.8Ω pod for tight MTL vaping — covering the two most common vaping styles from a single device. Available in seven colours, each with a colour-coded anodised aluminium drip tip. The San Dynasty Pro is the upgrade over the original San Dynasty, replacing the smaller 14500 cell with a higher-capacity 16500 and adding the TFT display and intelligent wattage management.

Replaceable 16500 Battery — The Feature That Changes the Equation

Most pod kits ship with a sealed internal battery. When that cell degrades — and every lithium cell degrades over time — the battery and the device become one problem. The San Dynasty Pro solves this at the design stage by using a replaceable INR 16500 cell. When the battery loses capacity, replace the cell, not the kit. A 1,500mAh 16500 battery is included in the box from day one.

The INR 16500 cell runs at 3.72V nominal with a 13A continuous discharge rating — a capable cell for a kit operating up to 30W. The 16500 format is also an upgrade over the original San Dynasty's 14500 battery: the 16500 is a physically larger cell with higher capacity, which translates to longer runtime per charge and fewer mid-day top-ups for regular vapers.

Charging is via USB-C at 5V/2A directly on the device. Alternatively, remove the 16500 cell and charge it in a compatible external charger — keeping a pre-charged spare cell ready is the most convenient way to stay vaping without waiting for a USB-C charge cycle to complete. Spare INR 16500 batteries may be available separately — check Vapourcore for current stock.

Up to 30W — Smart Auto-Wattage and Manual Control

The San Dynasty Pro delivers up to 30W of adjustable output — and that figure is what enables the included 0.6Ω and 0.8Ω pods to feel meaningfully different from each other in warmth and airflow. Understanding the wattage system explains how this device actually works.

The smart chipset inside the San Dynasty Pro detects the resistance of the inserted pod the moment it is connected and sets the recommended wattage automatically. Insert the 0.8Ω MTL pod and the chipset fires at a lower, controlled wattage for a smooth, tight draw. Insert the 0.6Ω RDL pod and the chipset steps up the output — running the pod warmer for a more open, airier experience. No manual adjustment required at any point unless you want it.

For experienced vapers who prefer to dial in their own settings, the San Dynasty Pro allows manual wattage adjustment beyond the auto-setting — up to the 30W maximum. Fine-tune warmth and vapour density to a specific preference, or simply leave the auto-wattage to handle it. Either way, the 0.42 inch TFT display shows the current wattage, battery level, and coil resistance in real time.

CNC Aluminium Build — Precision Machined Construction

The San Dynasty Pro body is CNC machined from aluminium alloy. That distinction matters: CNC machining removes material from a solid billet to produce the final shape, producing a tighter tolerance and more precise finish than injection-moulded plastic or die-cast zinc alloy construction. The result is a device that handles and presents closer to hobbyist-inspired hardware than to the mass-market pod kits most vapers are used to.

At 82.5 × 37.7 × 19.0mm the San Dynasty Pro is compact enough to pocket without bulk and substantial enough to hold with confidence. The anodised aluminium drip tip extends the machined quality through to the mouthpiece — each of the seven colours receives a colour-coded drip tip in the same anodised aluminium finish rather than the generic black ABS tips fitted to most competitors at this price. Seven colours are available across the same CNC chassis: Stealth Black, Billet Silver, Vintage Reserve, Atlantic Blue, Rose Quartz, Lavender, and Ocean Blue.

Pod Guide — Which Resistance for Which Draw?

Two pods are included in the box. The correct choice for any session depends on draw style preference and e-liquid type.

0.8Ω pod — MTL (Mouth-to-Lung): A tight, cigarette-like draw that restricts airflow and produces a discreet amount of vapour. The auto-wattage fires this pod at a lower output for a smooth, cool-to-warm inhale. Well suited to ex-smokers and vapers who prefer a draw that replicates the pull of a cigarette. Use with nicotine salts at 10mg or 20mg, or 50/50 freebase e-liquid at 3mg to 18mg.

0.6Ω pod — RDL (Restricted Direct Lung): A warmer, airier draw with noticeably more vapour production than the 0.8Ω MTL pod. The auto-wattage fires this pod at a higher output to suit the lower resistance — insert it and the San Dynasty Pro adjusts automatically. Use with nicotine salts or 50/50 freebase for a warmer, more flavour-forward result than the MTL pod delivers.

0.4Ω pod — Loose RDL (available separately): The most open draw in the San Dynasty pod range, running at higher wattage for maximum vapour output. Best suited to 50/50 freebase e-liquid at lower nicotine strengths — the open draw and higher output are less suited to 20mg nic salt at this resistance. Available in the San Dynasty pod range, sold separately.

All three pods use built-in mesh coils with a 2ml e-liquid capacity. The auto-wattage removes the guesswork from pod changes at every resistance level.

E-Liquid Guide — What Works With Each Pod

The San Dynasty Pro's pod range covers two vaping styles and suits both nicotine salt and 50/50 freebase e-liquids. High-VG shortfills are not recommended in any San Dynasty pod — the 50/50 VG/PG ratio wicks correctly in the mesh coil; higher VG blends may not wick quickly enough at the pod's fill rate and can increase the chance of dry hits.

• 0.8Ω MTL pod: Nicotine salts at 10mg or 20mg. 50/50 freebase at 3mg to 18mg. The tight draw and lower auto-wattage setting suit nic salts particularly well — smooth throat hit, clear flavour.
• 0.6Ω RDL pod: Nicotine salts at 10mg or 20mg. 50/50 freebase e-liquids. The warmer draw and higher auto-wattage step up flavour production — nic salts remain smooth at both strengths.
• 0.4Ω loose RDL pod (separate): 50/50 freebase at lower nicotine strengths. The open draw and higher output are better suited to lower-strength e-liquid — avoid 20mg nicotine salt in this pod.

Seven Colours

• Stealth Black — an all-black finish, understated and professional.
• Billet Silver — the natural CNC aluminium tone, close to bare machined metal.
• Vintage Reserve — a warm, aged finish that complements the machined material aesthetic.
• Atlantic Blue — a deep, muted ocean blue.
• Rose Quartz — a dusky, pale pink — the softest finish in the range.
• Lavender — a soft, muted purple.
• Ocean Blue — a brighter, more vivid blue than Atlantic Blue.

All seven share the same CNC machined aluminium alloy chassis and the colour-coded anodised aluminium drip tip.

Specifications

What's in the Box

• 1x Orca Vape San Dynasty Pro device
• 1x San Dynasty 0.6Ω RDL pod (mesh coil, 2ml)
• 1x San Dynasty 0.8Ω MTL pod (mesh coil, 2ml)
• 1x Anodised aluminium drip tip (colour coded to device)
• 1x INR 16500 1,500mAh battery
• 1x Quick start guide

Frequently Asked Questions

What is the Orca Vape San Dynasty Pro Pod Kit?

The Orca Vape San Dynasty Pro is a refillable pod kit built from CNC machined aluminium alloy with a replaceable INR 16500 1,500mAh battery and a 0.42 inch TFT colour display. It delivers up to 30W of adjustable output with a smart auto-wattage system that detects coil resistance on pod insertion. Two pods are included — 0.6Ω for RDL and 0.8Ω for MTL vaping.

What is the maximum wattage of the San Dynasty Pro?

The Orca Vape San Dynasty Pro delivers up to 30W of adjustable output. The smart chipset automatically detects the resistance of the inserted pod and sets the recommended wattage — the 0.8Ω MTL pod fires at a lower wattage and the 0.6Ω RDL pod fires warmer. Experienced vapers can manually override the auto-setting to dial in their preferred warmth and vapour density.

Is the battery in the San Dynasty Pro replaceable?

Yes. The San Dynasty Pro uses a replaceable INR 16500 battery — a 1,500mAh, 3.72V, 13A cell. When the battery loses capacity over time, replace the cell rather than the whole kit. A 1,500mAh 16500 battery is included in the box. Spare 16500 batteries may be available separately — check Vapourcore for current stock.

What pods come in the box with the San Dynasty Pro?

Two San Dynasty pods are included: one 0.6Ω pod for a warmer RDL draw and one 0.8Ω pod for tight MTL vaping. Both have built-in mesh coils and a 2ml capacity. A 0.4Ω pod is also available in the San Dynasty pod range for a looser, more open RDL experience at higher wattage — sold separately.

Which pods give MTL and which give RDL?

The 0.8Ω San Dynasty pod gives a tight, cigarette-like MTL draw — well suited to nic salts. The 0.6Ω pod gives a warmer, airier RDL draw with more vapour than the 0.8Ω option. The 0.4Ω pod (available separately) gives a looser, more open RDL experience. The smart auto-wattage system adjusts the output automatically for each pod when inserted.

What e-liquids work in the San Dynasty Pro?

The 0.8Ω MTL pod works with nic salts (10mg and 20mg) and 50/50 freebase e-liquids. The 0.6Ω RDL pod also suits nic salts and 50/50 blends. High-VG e-liquids are not recommended — the 50/50 ratio wicks correctly in the pod's mesh coil, helping to reduce the chance of flooding or dry hits. For the 0.4Ω pod, 50/50 freebase at lower nicotine strengths is best suited.

What is the difference between the San Dynasty and the San Dynasty Pro?

The original San Dynasty uses a smaller 14500 battery. The San Dynasty Pro upgrades to a larger 16500 battery (1,500mAh) for higher capacity and longer runtime per charge. The Pro also adds a 0.42 inch TFT colour display and the smart auto-wattage system that automatically detects coil resistance and sets recommended output. The Pro delivers up to 30W versus a lower ceiling on the original.

How many colours does the San Dynasty Pro come in?

Seven colours are available: Stealth Black, Billet Silver, Vintage Reserve, Atlantic Blue, Rose Quartz, Lavender, and Ocean Blue. All share the CNC machined aluminium alloy body and anodised aluminium drip tip, colour coded to match the device finish. The seven colours span neutral professional tones through to distinctive jewel and pastel options.

How do I charge the San Dynasty Pro?

Charge via the USB-C port at 5V/2A. Alternatively, remove the INR 16500 battery and charge it in a compatible external charger. Keeping a pre-charged spare 16500 cell — if available separately — is the most convenient way to stay vaping without waiting for the device to recharge via USB-C.

Is the Orca Vape San Dynasty Pro compatible with all pods?

No. The San Dynasty Pro uses proprietary San Dynasty pods — 0.4Ω, 0.6Ω, and 0.8Ω. These are not cross-compatible with other brands' pods. The San Dynasty Pro's magnetic pod connection fits only the San Dynasty pod range.

Helpful Links

• Orca Vape brand hub — full Orca Vape range at Vapourcore
• Orca Vape San Dynasty replacement pods
• Refillable pod vape kits — all brands
• Delivery and shipping information
• Returns policy

Important Information

• For use by adults aged 18 and over only
• Keep out of reach of children and pets
• INR 16500 battery — handle with care, do not short circuit, use only in compatible regulated devices
• Refillable device — use with 50/50 VG/PG or nicotine salt e-liquids only; not suitable for high-VG shortfills
• Not suitable for sub-ohm use
• MHRA Device ECID: 08013-25-00005 | Pod 0.6Ω: 08013-25-00003 | Pod 0.8Ω: 08013-25-00004
• Manufacturer: Shenzhen Feli Technology Co., Ltd. | Brand: Orca Vape