Specifications
- Product type: Replacement refill pack — device not included
- Pack contents: 1x 2ml prefilled pod + 1x 4ml auto-refill container
- Total e-liquid: 6ml per pack
- Puffs: Up to 6,000 per pack (manufacturer estimate, usage dependent)
- Nicotine strength: 20mg nicotine salt only
- PG/VG: 50/50
- Coil: 0.9Ω mesh — integrated into 2ml pod, replaced with every pack
- Vaping style: MTL (Mouth to Lung)
- Activation: Inhale-activated via Higo BB Pulse 6000 device
- Assembly: 2ml pod inserts into base of 4ml container — push until click
- Refillable: No — sealed prefilled system
- Compatible device: Higo BB Pulse 6000 only
- Flavours: 31
- MHRA: BNF TECH LTD (10002) and ACTIVE ELECTRONIC TECHNOLOGY LIMITED (12644)
- TPD compliant: Yes
FAQs
What are Higo BB Pulse 6000 Pods?
Higo BB Pulse 6000 Pods are the official replacement refill packs for the Higo BB Pulse 6000 Kit. Each pack contains a 2ml prefilled pod and a 4ml auto-refill container — 6ml of 20mg nicotine salt e-liquid per pack — delivering up to 6,000 puffs (manufacturer estimate, usage dependent) through an integrated 0.9Ω mesh coil. Compatible with the Higo BB Pulse 6000 device only. No device included.
How many flavours are available?
31 flavours are available, spanning iced fruit, pure fruit, citrus, menthol, candy, and tobacco profiles. Among the most distinctive are Mr Higo (blueberry, menthol, and a rare herbal fennel note), Luba Luba (lychee — floral and honey-sweet), and Sakura Grape (juicy grape with cherry blossom floral). All 31 flavours are linked in the flavour section above.
How does the 2ml + 4ml system work?
The 2ml pod inserts into the base of the 4ml auto-refill container — push firmly from below until you hear a click confirming the connection. The 4ml container then automatically feeds e-liquid into the pod during normal use. When both are exhausted — signalled by a sensory drop in flavour or vapour — remove the entire unit and replace with a fresh pack.
Why does the pod insert into the base of the container?
The Higo BB Pulse 6000 uses a bottom-feed assembly — the 2ml pod goes into the base of the 4ml container rather than the top. This is the most common source of setup confusion. Always insert from below and listen for the click. If the click is not heard, the two components are not correctly connected and the auto-refill feed will not be active.
When should I replace my Higo BB Pulse 6000 pod?
Replace when flavour intensity noticeably drops or vapour production decreases — not when the 4ml container appears visually empty. When the 4ml container runs dry, the 2ml pod still holds e-liquid. The sensory signal (thinner flavour, reduced vapour, or a dry note) is the correct indicator that both components are genuinely exhausted.
How many puffs does each Higo BB Pulse 6000 pod give?
Up to 6,000 puffs per pack from the combined 6ml (manufacturer estimate, usage dependent). Actual yield varies with draw length and frequency. The correct replacement signal is sensory — a noticeable drop in flavour or vapour — not a fixed puff count or the visual state of the 4ml container.
What nicotine strength are Higo BB Pulse 6000 pods?
All 31 Higo BB Pulse 6000 flavours are available in 20mg nicotine salt only. This is the sole strength available for the Higo BB Pulse 6000 pod range. The 50/50 VG/PG formula and 0.9Ω mesh coil are matched to 20mg nicotine salt for a smooth MTL draw.
Are Higo BB Pulse 6000 pods compatible with other devices?
No. Higo BB Pulse 6000 pods are compatible with the Higo BB Pulse 6000 device only. They are not compatible with other Higo kits, other brands' pod systems, or disposable vape devices. Always confirm your device is the Higo BB Pulse 6000 before ordering replacement packs.
Can I switch flavours between replacement packs?
Yes. Each replacement pack is a self-contained sealed unit. When one pack is exhausted, any of the 31 available flavours can be installed as the next replacement. Flavour carryover between packs is typically minimal.
What is Mr Higo flavour?
Mr Higo is blueberry, menthol, and fennel. Fennel has a herbal, anise-like character — sweet and botanical. The fennel note arrives mid-to-late draw after the blueberry and menthol, adding a depth that is genuinely rare in any pod format. For vapers who find every standard fruit-ice and menthol option too familiar, Mr Higo is the different experience.
What is Luba Luba flavour?
Luba Luba is Higo's lychee pod. Lychee has a floral, honey-sweet, slightly rose-like flavour — entirely unlike any berry or citrus profile. The name gives no indication of the contents. It is the most exotic and floral option in the Higo BB Pulse 6000 range.
What is Sakura Grape flavour?
Sakura Grape pairs juicy grape with cherry blossom. Sakura is the Japanese word for cherry blossom — it does not taste like cherry fruit. Cherry blossom adds a delicate, lightly perfumed floral quality behind vivid grape sweetness, making this the most sophisticated pod in the range.
What is Hub Hub flavour?
Hub Hub is Higo's bubblegum-inspired flavour — classic, sweet, and smooth from inhale to exhale. Also listed under the alternative spelling Huba Huba. Hub Hub Ice adds a bracing icy close to the bubblegum base. Strawberry Hub Hub pairs ripe strawberry with the bubblegum profile. All three are distinct pods within the same bubblegum family.
What coil do Higo BB Pulse 6000 pods use?
Every Higo BB Pulse 6000 replacement pack contains a 0.9Ω mesh coil integrated into the 2ml pod. The mesh design distributes heat evenly across the e-liquid surface, helping to maintain consistent flavour across the pack's life (usage dependent). The coil is sealed inside the pod — a fresh mesh coil comes automatically with every replacement pack. No separate coil purchases required.
How do I install a Higo BB Pulse 6000 replacement pod?
Remove the empty unit from the device. Unpack the new pod and container and remove all protective seals. Insert the 2ml pod into the base of the 4ml container — push from below until you hear a click confirming assembly. Slide the combined unit into the device. Wait a few seconds for the mesh coil to saturate, then inhale to activate.
What happens if I get a burnt taste from my Higo BB Pulse 6000?
A burnt taste means the mesh coil inside the 2ml pod is running dry. This happens either because the pack is near exhaustion or because rapid chain-vaping has outpaced the 4ml container's refill feed rate. Rest the device briefly between draws. If the burnt taste persists after resting, replace the pack. If it occurs with a new pack, confirm the pod was correctly inserted into the base of the container and the click was heard.
Are Higo BB Pulse 6000 pods TPD compliant?
Yes. All Higo BB Pulse 6000 replacement packs are fully UK TPD compliant and MHRA-notified by BNF TECH LTD (company code 10002) and ACTIVE ELECTRONIC TECHNOLOGY LIMITED (company code 12644). The 2ml pod capacity stays within UK legal e-liquid container limits and the 4ml container is a sealed, compliant refill system.
What is the difference between Higo BB Pulse 6000 pods and the Higo BB Pulse 6000 Kit?
The Higo BB Pulse 6000 Kit is the complete starter package — it includes the rechargeable device, the first replacement pack, and a user manual. Higo BB Pulse 6000 pods are replacement packs only — no device included. If you already own the Higo BB Pulse 6000 device, purchase replacement pods. If you are starting from scratch without a device, purchase the complete kit first.
How do I know if I have the right pods for my device?
Higo BB Pulse 6000 replacement packs are compatible with the Higo BB Pulse 6000 device only. They will not fit other Higo models or third-party devices. Confirm the exact model name on your device or its packaging before ordering. The pod's bottom-feed assembly — pod into the base of the container — is specific to the Higo BB Pulse 6000 system.
Do Higo BB Pulse 6000 pods come with a USB-C cable?
No. Replacement pod packs do not include a USB-C cable or any charging equipment. The USB-C cable is included with the Higo BB Pulse 6000 Kit purchase only — and even then, the cable is part of the kit, not the individual pods. Any standard USB-C cable is compatible with the Higo BB Pulse 6000 device charging port.
Important Information
- UK TPD compliant — MHRA-notified by BNF TECH LTD (10002) and ACTIVE ELECTRONIC TECHNOLOGY LIMITED (12644)
- Contains 20mg nicotine salt — nicotine is an addictive substance
- Not suitable for non-smokers, those who have never vaped, or people who are pregnant
- If you have a medical condition or are taking medication, seek advice from a healthcare professional before use
- Keep out of reach of children and pets
- Compatible with Higo BB Pulse 6000 device only — not for use with other devices
- Not refillable — sealed prefilled system. Do not attempt to open or reuse components
- Insert 2ml pod into the base of the 4ml container and confirm the click before installing in device
- Browse the full range of prefilled pod vape kits at Vapourcore
- For delivery information, visit our delivery and shipping page
- For return queries, visit our returns page