{"product_id":"ske-pro-max-30k-prefilled-pods-blueberry-raspberry","title":"SKE Pro Max 30K Prefilled Pods Blueberry Raspberry","description":"\u003ch1\u003eBlueberry Raspberry SKE 30K Pro Max Refill Pods\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eBlueberry Raspberry SKE 30K Pro Max Refill Pods\u003c\/strong\u003e deliver a soft, sweet blueberry draw that develops a brighter raspberry tang through the mid-draw and close, using SKE Crystal Original V2 nicotine salt — a two-berry profile where the blueberry provides the sweet body and the raspberry lifts the blend with a clean, lightly tart finish. This is a \u003cstrong\u003eSingle Edition\u003c\/strong\u003e pack, with both pods loaded with Blueberry Raspberry for up to 30,000 puffs of consistent flavour from 20ml of 20mg (2%) nicotine salt, automatically refilled throughout each pod's lifespan. Compatible exclusively with the \u003cstrong\u003eSKE 30K Pro Max\u003c\/strong\u003e — see the \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/ske-30k-pro-max-prefilled-pod-kit\"\u003eSKE 30K Pro Max kit collection\u003c\/a\u003e for device options, and browse all available flavours in the \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/ske-30k-pro-max-prefilled-pod\"\u003eSKE 30K Pro Max prefilled pod range\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat Does Blueberry Raspberry Taste Like?\u003c\/h2\u003e\n\u003cp\u003eOn the inhale, a soft, smooth blueberry opens the draw with a rounded, naturally sweet berry character — gentle and well-defined without any sharpness or tartness at this stage. The blueberry here reads as a clean, ripe fruit rather than a candy-forward interpretation, establishing a warm, even sweetness that carries the draw forward from the first puff.\u003c\/p\u003e\n\u003cp\u003eThrough the mid-draw, the raspberry note begins to emerge alongside the blueberry, its brighter, more acidic character starting to lift the blend in a noticeably different direction. The profile moves at this stage from the blueberry's softer sweetness toward a more complex sweet-and-tart balance — the blueberry holds the body while the raspberry pushes lightly against the sweetness, making the overall draw feel more dynamic and mouth-active as it develops.\u003c\/p\u003e\n\u003cp\u003eOn the exhale, the raspberry takes over as the dominant closing note — brighter and tangier than the blueberry, giving the finish a lightly tart, clean berry character that contrasts with the warmer blueberry base. There is no cooling or ice element; the raspberry's natural tartness provides the refreshing quality on the close without any added chill. The finish settles cleanly, with the two berries complementing each other rather than competing. Explore the full SKE range at the \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/ske-vape\"\u003eSKE brand hub\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSKE 30K Pro Max Pod Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Device\u003c\/td\u003e\n\u003ctd\u003eSKE 30K Pro Max only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdition Type\u003c\/td\u003e\n\u003ctd\u003eSingle Edition (both pods: Blueberry Raspberry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003e2 x 1.8ml pods + 2 x 8.2ml auto-refill containers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal E-Liquid\u003c\/td\u003e\n\u003ctd\u003e20ml per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePuff Count\u003c\/td\u003e\n\u003ctd\u003eUp to 30,000 total (~15,000 per pod, usage dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-Liquid Formula\u003c\/td\u003e\n\u003ctd\u003eSKE Crystal Original V2 Nicotine Salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNicotine Strength\u003c\/td\u003e\n\u003ctd\u003e20mg (2%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVG\/PG Ratio\u003c\/td\u003e\n\u003ctd\u003e50\/50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil\u003c\/td\u003e\n\u003ctd\u003eBuilt-in mesh coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActivation\u003c\/td\u003e\n\u003ctd\u003eDraw-activated MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eTPD compliant — UK MHRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSingle Edition vs Named Editions — What's the Difference?\u003c\/h2\u003e\n\u003cp\u003eThis is a \u003cstrong\u003eSingle Edition\u003c\/strong\u003e pack — both pods contain Blueberry Raspberry, delivering up to 30,000 puffs of one consistent flavour. If you want Blueberry Raspberry paired with a sharply contrasting option in a single pack, SKE's \u003cstrong\u003eUltimate Edition\u003c\/strong\u003e is a Named Edition that combines Blueberry Raspberry with Lemon \u0026amp; Lime — pairing the soft, sweet berry profile with a sharp citrus draw across the two pods, each giving approximately 15,000 puffs. Both formats use the same 20ml of e-liquid at the same price. Browse all available options in the \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/pre-filled-vape-pods\"\u003eprefilled vape pods\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch2\u003eHow to Fit Your Blueberry Raspberry SKE 30K Pods\u003c\/h2\u003e\n\u003cp\u003eFitting a new pod set takes under a minute and follows the same process for every SKE 30K Pro Max pod replacement:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the spent pod set from the device by pulling it free from the mouthpiece end.\u003c\/li\u003e\n\u003cli\u003eUnpack the new pods — remove all seals, stickers, and protective caps from both the 1.8ml pod and the 8.2ml refill container before connecting them.\u003c\/li\u003e\n\u003cli\u003ePress the 8.2ml refill container onto the base of the 1.8ml pod and push until you feel it click and lock firmly into position.\u003c\/li\u003e\n\u003cli\u003eInsert the assembled pod set into the SKE 30K Pro Max device and push it in until it clicks securely into place.\u003c\/li\u003e\n\u003cli\u003eWait 20–30 seconds before your first draw to allow the coil to fully saturate with e-liquid, reducing the risk of a dry or harsh draw on the first puff.\u003c\/li\u003e\n\u003cli\u003eInhale to activate. The 8.2ml container automatically feeds the 1.8ml pod throughout its lifespan — no manual topping up is required. Once the first pod set is exhausted (approximately 15,000 puffs, usage dependent), insert the second pod set from the same pack.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThese pods are for use with the \u003cstrong\u003eSKE 30K Pro Max only\u003c\/strong\u003e — do not use with any other SKE or third-party device. For details on delivery options before ordering, visit the \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/delivery-and-shipping\"\u003eDelivery \u0026amp; Shipping\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does Blueberry Raspberry taste like in the SKE 30K Pro Max pods?\u003c\/h3\u003e\n\u003cp\u003eBlueberry Raspberry opens with a soft, rounded blueberry on the inhale — smooth and sweet without any tartness. Through the mid-draw, a brighter raspberry note begins to emerge, lifting the blend with a lightly acidic, more mouth-active character. On the exhale, the raspberry takes the close, giving the finish a clean, lightly tart berry character. There is no cooling or ice element — the raspberry's natural tartness provides the refreshing quality on the finish without any added chill.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a Single Edition and a Named Edition SKE 30K pod?\u003c\/h3\u003e\n\u003cp\u003eA Single Edition — like Blueberry Raspberry — loads both pods with the same flavour, giving up to 30,000 puffs of one consistent taste. A Named Edition pairs two different flavours across the two pods, with a twist-to-switch mouthpiece for instant switching. Each flavour gives approximately 15,000 puffs per pack. Both formats contain the same 20ml of SKE Crystal Original V2 e-liquid at the same price — the distinction is whether you prefer one consistent flavour or an alternating pair.\u003c\/p\u003e\n\u003ch3\u003eHow many puffs do Blueberry Raspberry SKE 30K Pro Max pods give?\u003c\/h3\u003e\n\u003cp\u003eEach Blueberry Raspberry pack contains two pods, each rated at approximately 15,000 puffs — giving a total of up to 30,000 puffs per pack, usage dependent. Actual figures will vary based on draw length and how frequently the device is used. The per-pod estimate is relevant because the pods are used consecutively — approximately 15,000 puffs from the first, then the second takes over once the first is exhausted.\u003c\/p\u003e\n\u003ch3\u003eAre Blueberry Raspberry SKE 30K Pro Max pods compatible with other SKE devices?\u003c\/h3\u003e\n\u003cp\u003eNo — Blueberry Raspberry SKE 30K Pro Max pods are only compatible with the SKE 30K Pro Max device. They are not designed for use with the SKE Crystal Pro Max, SKE Crystal Switch 30K, or any other SKE or third-party product. The pod connector, dimensions, and auto-refill mechanism are specific to the SKE 30K Pro Max, and using these pods in a different device is not recommended.\u003c\/p\u003e\n\u003ch3\u003eHow do I know when to switch to the second pod?\u003c\/h3\u003e\n\u003cp\u003eThe most reliable signal is a noticeable reduction in the Blueberry Raspberry flavour intensity, or a drop in vapour volume — both indicate the first pod and its 8.2ml auto-refill container have been exhausted. Some SKE 30K Pro Max devices include an LED indicator to signal pod depletion. Once the first pod set is spent, remove it from the device, insert the second pre-assembled pod set from the pack, and wait 20–30 seconds before drawing again.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy Blueberry Raspberry SKE 30K Pro Max pods in the UK?\u003c\/h3\u003e\n\u003cp\u003eBlueberry Raspberry SKE 30K Pro Max Refill Pods are available from Vapourcore, a UK-based vape retailer stocking the full SKE 30K Pro Max pod range across both Single Edition and Named Edition formats. All products are TPD compliant and meet UK MHRA regulatory requirements. Age verification is required at checkout and UK delivery is available on all orders.\u003c\/p\u003e\n\u003ch2\u003eImportant Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTPD compliant — meets all UK MHRA regulatory requirements\u003c\/li\u003e\n\u003cli\u003eContains nicotine — nicotine is an addictive substance. For adult nicotine users only. \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/age-verification\"\u003eAge verification required\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNot recommended for non-smokers, pregnant women, or those with heart conditions\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children and pets\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry location away from direct sunlight\u003c\/li\u003e\n\u003cli\u003eCompatible with SKE 30K Pro Max only — not for use with any other device\u003c\/li\u003e\n\u003cli\u003eSealed auto-refill system — do not attempt to manually refill the containers\u003c\/li\u003e\n\u003cli\u003eFor full returns information visit the \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/returns\"\u003eReturns\u003c\/a\u003e page\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SKE","offers":[{"title":"20mg","offer_id":57579080221055,"sku":"SKEProMax30KPrefilledPodsBlueberryRaspberry","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3426\/9997\/files\/SKE_30K_Pro_Max_Prefilled_Pod_Blueberry_Raspberry.png?v=1779271816","url":"https:\/\/www.vapourcore.com\/products\/ske-pro-max-30k-prefilled-pods-blueberry-raspberry","provider":"Vapourcore®","version":"1.0","type":"link"}