{"product_id":"hayati-pro-max-plus-6000-prefilled-pod-zero-nicotine-fizzy-cherry","title":"Hayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry","description":"\u003carticle class=\"product-description\"\u003e\n\n  \u003c!-- H1 --\u003e\n  \u003ch1\u003eHayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry\u003c\/h1\u003e\n\n  \u003c!-- Opening Summary --\u003e\n  \u003csection class=\"product-intro\"\u003e\n    \u003cp\u003e\n      The \u003cstrong\u003eHayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry\u003c\/strong\u003e is\n      a pre-filled replacement pod made exclusively for adult users aged 18 and over who own\n      the \u003cstrong\u003eHayati Pro Max Plus 6000\u003c\/strong\u003e device. This is not a standalone vape kit\n      and it is not a refillable open pod system. It is a dedicated replacement pod that\n      connects to the Hayati Pro Max Plus 6000 via a \u003cstrong\u003eMagnetic Push-Fit connection\u003c\/strong\u003e,\n      delivering a consistent, inhale-activated \u003cstrong\u003eMouth-to-Lung\u003c\/strong\u003e vaping experience\n      with \u003cstrong\u003ezero nicotine (0mg)\u003c\/strong\u003e and a bright, fruit-forward\n      \u003cstrong\u003eFizzy Cherry\u003c\/strong\u003e flavour.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      Each unit provides a total capacity of \u003cstrong\u003e12ml\u003c\/strong\u003e, comprising a\n      \u003cstrong\u003e2ml pre-filled pod\u003c\/strong\u003e ready to use immediately and a separate\n      \u003cstrong\u003e10ml refill container\u003c\/strong\u003e for topping up the pod once the initial fill runs\n      low. Flavour and vapour delivery are powered by an \u003cstrong\u003eAdvanced Mesh 1.2Ohm Coil\u003c\/strong\u003e,\n      which provides even e-liquid distribution and reliable output throughout the life of the\n      pod. The manufacturer estimates up to \u003cstrong\u003e6000 puffs\u003c\/strong\u003e, though actual output\n      will vary depending on draw length and frequency of use. Browse the full\n      \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/hayati-pro-max-plus-6000-prefilled-pod-zero-nicotine\" title=\"Hayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine collection at Vapourcore\"\u003e\n        Hayati Pro Max Plus 6000 zero nicotine pod collection at Vapourcore\u003c\/a\u003e\n      to see all available flavours.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- At a Glance --\u003e\n  \u003csection class=\"product-glance\"\u003e\n    \u003ch2\u003eAt a Glance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eBright, lively \u003cstrong\u003eFizzy Cherry\u003c\/strong\u003e flavour with a sparkling finish\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e0mg \/ zero nicotine\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003ePre-filled replacement pod — not a complete vape device\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e12ml total capacity\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003eFormat: \u003cstrong\u003e2ml pre-filled pod + 10ml refill container\u003c\/strong\u003e\n\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAdvanced Mesh 1.2Ohm Coil\u003c\/strong\u003e for consistent flavour delivery\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMouth-to-Lung (MTL)\u003c\/strong\u003e draw style\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eInhale activated\u003c\/strong\u003e — no button required\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMagnetic Push-Fit\u003c\/strong\u003e connection\u003c\/li\u003e\n      \u003cli\u003eCompatible \u003cstrong\u003eonly\u003c\/strong\u003e with the \u003cstrong\u003eHayati Pro Max Plus 6000\u003c\/strong\u003e range\u003c\/li\u003e\n      \u003cli\u003eUp to \u003cstrong\u003e6000 puffs\u003c\/strong\u003e — manufacturer estimate, usage dependent\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eAdult product: 18+ only\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- What Is This Product --\u003e\n  \u003csection class=\"product-what-is\"\u003e\n    \u003ch2\u003eWhat Is the Hayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry?\u003c\/h2\u003e\n    \u003cp\u003e\n      This product is a \u003cstrong\u003ereplacement pod\u003c\/strong\u003e — it is not a complete vape kit and\n      cannot be used independently of a compatible Hayati Pro Max Plus 6000 device. It is not\n      a refillable open pod system, meaning it is not designed to be opened, manually filled,\n      or used with third-party e-liquid. It is a closed, pre-filled unit manufactured\n      specifically for the \u003cstrong\u003eHayati Pro Max Plus 6000 platform\u003c\/strong\u003e.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      The format is practical and straightforward for repeat buyers. The 2ml pod arrives\n      pre-filled with Fizzy Cherry e-liquid and is ready to attach and use immediately.\n      When the pod level drops, the included 10ml refill container is used to top it up,\n      bringing the total usable e-liquid across the unit to 12ml. The Magnetic Push-Fit\n      connection makes pod attachment quick, secure, and easy to repeat. For buyers who already\n      own the correct Hayati Pro Max Plus 6000 device, this pod requires no setup and no\n      additional equipment.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      It is important to note that Hayati pods are \u003cstrong\u003enot universally interchangeable\u003c\/strong\u003e\n      across the brand's range. This pod is made for the Hayati Pro Max Plus 6000 specifically\n      and will not function correctly in other Hayati devices. Buyers who are unsure which\n      device they own should review the full\n      \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/hayati\" title=\"Hayati brand collection at Vapourcore\"\u003eHayati collection at Vapourcore\u003c\/a\u003e\n      before ordering.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Flavour Profile --\u003e\n  \u003csection class=\"product-flavour\"\u003e\n    \u003ch2\u003eFizzy Cherry Flavour Profile\u003c\/h2\u003e\n    \u003cp\u003e\n      Fizzy Cherry is a \u003cstrong\u003ebright, cherry-led fruit flavour\u003c\/strong\u003e with a lively,\n      sparkling edge that separates it from flat or one-dimensional cherry options. On the\n      inhale, it delivers a clear, sweet cherry note that is recognisable and direct without\n      being artificially heavy. The fizzy quality comes through most noticeably on the exhale,\n      giving the flavour a lifted, effervescent finish — closer to the sensation of a\n      cherry-flavoured fizzy drink than a still fruit confection.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      Fizzy Cherry is sweeter than mint or tobacco-style flavours but is not designed to\n      replicate a thick cherry syrup. The sweetness is present and fruit-forward without\n      becoming cloying or heavy over extended use. It is not a dark berry blend and carries\n      none of the deep, musky character associated with blackcurrant or mixed berry profiles.\n      It is also not an ice or cooling flavour — there is no significant menthol or cooling\n      agent, and the freshness comes from the fizzy character of the flavour itself rather\n      than any added chill. For adults who want a \u003cstrong\u003efruit flavour with more energy and\n      lift\u003c\/strong\u003e than a plain, still cherry note, Fizzy Cherry is a well-defined and\n      commercially distinct option within the Hayati Pro Max Plus 6000 pod range.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Why Choose --\u003e\n  \u003csection class=\"product-why\"\u003e\n    \u003ch2\u003eWhy Choose the Hayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry?\u003c\/h2\u003e\n    \u003cp\u003e\n      This \u003cstrong\u003e0mg Fizzy Cherry pod\u003c\/strong\u003e is suited to a specific buyer profile, and\n      understanding that profile is useful before purchase. The zero nicotine strength makes\n      it appropriate for adult users who have chosen to remove nicotine from their vaping\n      entirely — whether they have already stepped down to 0mg or are selecting a nicotine-free\n      option for specific occasions. It is not a transitional product; it is a deliberate\n      choice for users who want the experience of vaping on their Hayati Pro Max Plus 6000\n      without any nicotine content.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      Within the Hayati Pro Max Plus 6000 device family, Fizzy Cherry occupies the brighter,\n      livelier end of the fruit flavour spectrum. Buyers who find plain fruit flavours too flat,\n      mint too cool, or tobacco too dry will likely find the fizzy cherry character a more\n      engaging option for regular use. It is also a practical repeat-purchase choice for\n      existing device owners who are already familiar with the Hayati Pro Max Plus 6000's draw\n      style, fit, and magnetic connection — making reordering simple and predictable.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Who Is It Best For --\u003e\n  \u003csection class=\"product-who\"\u003e\n    \u003ch2\u003eWho Is Fizzy Cherry Best For?\u003c\/h2\u003e\n    \u003cp\u003e\n      This pod is well suited to:\n    \u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eCherry flavour fans\u003c\/strong\u003e — buyers who specifically enjoy a cherry profile\n        and want it delivered with more energy and lift than a flat, still fruit note.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAdults who prefer sweeter fruit profiles\u003c\/strong\u003e — Fizzy Cherry is noticeably\n        sweeter and more fruit-forward than mint, tobacco, or menthol options, making it a\n        better fit for buyers who actively enjoy fruit-led vaping.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eUsers who want a lively, sparkling finish\u003c\/strong\u003e — the fizzy edge to this\n        flavour makes it more dynamic than a plain cherry option, and is likely to appeal to\n        adults who want a more interesting flavour experience rather than something flat\n        or static.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eZero nicotine adults on the Hayati Pro Max Plus 6000\u003c\/strong\u003e — existing\n        device owners at 0mg who want a convenient, compatible replacement pod in a flavour\n        that sits distinctly within the fruit category.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eRepeat purchasers who value a consistent and familiar pod\u003c\/strong\u003e — the\n        Magnetic Push-Fit connection and MTL draw style are identical across Hayati Pro Max\n        Plus 6000 pods, making Fizzy Cherry a reliable and familiar choice for buyers who\n        already know the platform.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Compatibility --\u003e\n  \u003csection class=\"product-compatibility\"\u003e\n    \u003ch2\u003eCompatibility: Hayati Pro Max Plus 6000 Devices Only\u003c\/h2\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eThis pod is compatible exclusively with the Hayati Pro Max Plus 6000 range.\u003c\/strong\u003e\n      It is not a universal pod and it will not fit other Hayati devices, even those within the\n      broader Hayati product family or those with similar puff count names. Hayati pods are not\n      interchangeable across all Hayati devices, and fitting an incorrect pod to a device will\n      affect the magnetic connection, airflow, and overall vaping performance.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      Before placing an order, buyers should confirm that their device is specifically the\n      \u003cstrong\u003eHayati Pro Max Plus 6000\u003c\/strong\u003e. If you are looking to purchase a compatible\n      device or need to confirm which device is correct for this pod, visit the\n      \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/hayati-pro-max-6000-puffs-vape\" title=\"Hayati Pro Max Plus 6000 device range at Vapourcore\"\u003e\n        Hayati Pro Max Plus 6000 device page at Vapourcore\u003c\/a\u003e\n      before ordering. Purchasing an incompatible pod is one of the most avoidable reasons\n      for returns in the pod vape category, and Vapourcore recommends confirming device\n      compatibility prior to every purchase.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      For details on Vapourcore's returns process in the event of an ordering error, please\n      visit the\n      \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/returns\" title=\"Returns policy at Vapourcore\"\u003eVapourcore returns page\u003c\/a\u003e.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Key Features --\u003e\n  \u003csection class=\"product-features\"\u003e\n    \u003ch2\u003eKey Features\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-filled replacement pod for the Hayati Pro Max Plus 6000\u003c\/li\u003e\n      \u003cli\u003eZero nicotine (0mg) — no nicotine content\u003c\/li\u003e\n      \u003cli\u003eFizzy Cherry flavour: bright, cherry-led, with a sparkling, effervescent finish\u003c\/li\u003e\n      \u003cli\u003e12ml total e-liquid capacity\u003c\/li\u003e\n      \u003cli\u003e2ml pre-filled pod included, ready to use immediately upon attachment\u003c\/li\u003e\n      \u003cli\u003e10ml refill container included for topping up the pod when the initial fill runs low\u003c\/li\u003e\n      \u003cli\u003eAdvanced Mesh 1.2Ohm Coil for consistent flavour clarity and vapour output\u003c\/li\u003e\n      \u003cli\u003eMouth-to-Lung (MTL) draw style\u003c\/li\u003e\n      \u003cli\u003eInhale activated — no button or manual firing mechanism required\u003c\/li\u003e\n      \u003cli\u003eMagnetic Push-Fit connection for secure and easy pod fitting\u003c\/li\u003e\n      \u003cli\u003eNot refillable with third-party e-liquid\u003c\/li\u003e\n      \u003cli\u003eNot compatible with any device other than the Hayati Pro Max Plus 6000\u003c\/li\u003e\n      \u003cli\u003eManufacturer puff estimate: up to 6000 — actual count is usage dependent\u003c\/li\u003e\n      \u003cli\u003eSold to adults aged 18 and over only\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Specifications Table --\u003e\n  \u003csection class=\"product-specs\"\u003e\n    \u003ch2\u003eFull Specifications\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n          \u003ctd\u003ePre-filled replacement pod\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n          \u003ctd\u003eHayati\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eRetailer\u003c\/th\u003e\n          \u003ctd\u003eVapourcore\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eFlavour\u003c\/th\u003e\n          \u003ctd\u003eFizzy Cherry\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eNicotine Strength\u003c\/th\u003e\n          \u003ctd\u003e0mg (zero nicotine)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eTotal Capacity\u003c\/th\u003e\n          \u003ctd\u003e12ml\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003ePod Format\u003c\/th\u003e\n          \u003ctd\u003e2ml pre-filled pod + 10ml refill container\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eCoil\u003c\/th\u003e\n          \u003ctd\u003eAdvanced Mesh 1.2Ohm Coil\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eDraw Style\u003c\/th\u003e\n          \u003ctd\u003eMouth-to-Lung (MTL)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eActivation\u003c\/th\u003e\n          \u003ctd\u003eInhale activated (draw activated)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n          \u003ctd\u003eMagnetic Push-Fit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eDevice Compatibility\u003c\/th\u003e\n          \u003ctd\u003eHayati Pro Max Plus 6000 only\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003ePuff Count\u003c\/th\u003e\n          \u003ctd\u003eUp to 6000 puffs (manufacturer estimate, usage dependent)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eAge Restriction\u003c\/th\u003e\n          \u003ctd\u003e18+ only — adult product\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- How to Use --\u003e\n  \u003csection class=\"product-how-to-use\"\u003e\n    \u003ch2\u003eHow to Use\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eConfirm device compatibility.\u003c\/strong\u003e This pod is designed for the Hayati\n        Pro Max Plus 6000 only. Do not attempt to use it with any other device or pod system.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eRemove the pod from its packaging.\u003c\/strong\u003e Remove any protective caps or\n        seals from the pod before fitting it to the device.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAttach the pod to the device.\u003c\/strong\u003e Align the pod with the Magnetic\n        Push-Fit connection point on your Hayati Pro Max Plus 6000 and press firmly until\n        the pod seats securely with no gap.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eAllow the coil to prime.\u003c\/strong\u003e When fitting a new pod, wait 1 to 2 minutes\n        before drawing. This allows the e-liquid to fully saturate the mesh coil and reduces\n        the risk of a dry or burnt-tasting draw.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eDraw to activate.\u003c\/strong\u003e The device is inhale activated. Draw on the\n        mouthpiece at a slow to moderate pace consistent with Mouth-to-Lung technique.\n        No button is required.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eTop up when the pod runs low.\u003c\/strong\u003e When flavour intensity or vapour\n        production begins to drop noticeably, use the included 10ml refill container to top\n        up the pod. Follow the refill instructions provided on the packaging carefully.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cstrong\u003eReplace the pod when performance declines.\u003c\/strong\u003e When the pod no longer\n        delivers satisfactory flavour or vapour output despite being adequately filled,\n        the pod coil has reached the end of its usable life and the pod unit should be replaced.\n      \u003c\/li\u003e\n    \u003c\/ol\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Troubleshooting --\u003e\n  \u003csection class=\"product-troubleshooting\"\u003e\n    \u003ch2\u003eTroubleshooting\u003c\/h2\u003e\n\n    \u003ch3\u003eNo Vapour\u003c\/h3\u003e\n    \u003cp\u003e\n      If the device produces no vapour, first check that the pod is fully and securely seated.\n      The Magnetic Push-Fit connection should feel firm with no visible gap between pod and\n      device body. Remove the pod and reattach it if the fit feels unstable. Confirm that\n      the device is adequately charged. If the connection and charge are both confirmed as\n      correct, check that the pod is not empty and that the 10ml refill container has been\n      used as directed.\n    \u003c\/p\u003e\n\n    \u003ch3\u003eWeak Flavour\u003c\/h3\u003e\n    \u003cp\u003e\n      Weak or faded Fizzy Cherry flavour is most commonly caused by a low e-liquid level in\n      the pod. Top up the pod using the 10ml refill container and allow 1 to 2 minutes before\n      drawing again so the coil can re-saturate fully. If flavour remains noticeably weak after\n      topping up and allowing sufficient priming time, the coil is likely approaching the end\n      of its usable life. In this case, the pod should be replaced.\n    \u003c\/p\u003e\n\n    \u003ch3\u003ePoor or Unreliable Connection\u003c\/h3\u003e\n    \u003cp\u003e\n      If the device does not consistently register the pod, remove the pod completely and\n      inspect the magnetic contact points on both the pod base and the device. Use a clean,\n      dry cloth to wipe both surfaces gently and remove any e-liquid residue or debris. Avoid\n      touching the contact points with wet, oily, or sticky fingers. Reattach the pod firmly\n      after cleaning and test again.\n    \u003c\/p\u003e\n\n    \u003ch3\u003eCondensation on Contacts\u003c\/h3\u003e\n    \u003cp\u003e\n      E-liquid condensation can collect on the magnetic contact surfaces and interrupt the\n      connection between pod and device. If moisture is present on the contacts, detach the\n      pod and dry both surfaces carefully using a clean, dry cloth. Allow a brief period for\n      both surfaces to fully dry before reattaching and drawing again.\n    \u003c\/p\u003e\n\n    \u003ch3\u003eKnowing When to Replace the Pod\u003c\/h3\u003e\n    \u003cp\u003e\n      Replace the pod when flavour quality declines meaningfully despite the pod being\n      adequately topped up, when vapour output drops without an identifiable connection or\n      fill issue, or when the pod has reached or exceeded the manufacturer's estimated\n      puff count of up to 6000 puffs. This figure is a manufacturer estimate and will vary\n      depending on individual draw length and usage frequency.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- FAQs --\u003e\n  \u003csection class=\"product-faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat is the Hayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry?\u003c\/h3\u003e\n      \u003cp\u003e\n        It is a pre-filled replacement pod made exclusively for the Hayati Pro Max Plus 6000\n        device. It is not a standalone vape kit and it is not a refillable open pod. It\n        arrives pre-filled with Fizzy Cherry e-liquid at 0mg nicotine and is ready to attach\n        to a compatible device immediately, with a 10ml refill container also included in the\n        pack for topping up the pod.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this pod 0mg and completely nicotine free?\u003c\/h3\u003e\n      \u003cp\u003e\n        Yes. This pod contains zero nicotine (0mg). There is no nicotine present in the\n        e-liquid. It is intended for adults who have chosen to vape without any nicotine\n        content.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat does Fizzy Cherry taste like in this pod?\u003c\/h3\u003e\n      \u003cp\u003e\n        Fizzy Cherry delivers a bright, cherry-led fruit flavour with a sparkling, effervescent\n        edge on the exhale. It is sweeter than mint but is not a heavy syrup. The fizzy\n        quality gives it more lift and energy than a plain still cherry flavour, making it\n        closer to a cherry-flavoured fizzy drink than a flat fruit confection.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs Fizzy Cherry an icy flavour or just a fruit flavour?\u003c\/h3\u003e\n      \u003cp\u003e\n        Fizzy Cherry is a fruit flavour, not an ice or cooling flavour. There is no significant\n        menthol or cooling agent in this pod. The freshness in the flavour comes from the\n        sparkling, fizzy character of the cherry rather than any added chill. Buyers expecting\n        an ice or menthol sensation should choose a different flavour within the Hayati Pro Max\n        Plus 6000 range.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes this pod fit the Hayati Pro Max Plus 6000?\u003c\/h3\u003e\n      \u003cp\u003e\n        Yes. This pod is made specifically for the Hayati Pro Max Plus 6000 and is fully\n        compatible with that device via its Magnetic Push-Fit connection. It is not compatible\n        with any other device or pod system.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDo all Hayati pods fit all Hayati devices?\u003c\/h3\u003e\n      \u003cp\u003e\n        No. Hayati pods are not universally interchangeable across the Hayati product range.\n        This pod is designed for the Hayati Pro Max Plus 6000 only. Buyers should always\n        confirm the exact device model before ordering replacement pods to avoid compatibility\n        and fit issues.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow many puffs does this pod provide?\u003c\/h3\u003e\n      \u003cp\u003e\n        The manufacturer estimates up to 6000 puffs per unit. This is an estimate only and\n        is usage dependent. Actual puff count will vary based on individual draw length,\n        draw speed, and how frequently the device is used.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes this pod use a mesh coil?\u003c\/h3\u003e\n      \u003cp\u003e\n        Yes. This pod is fitted with an Advanced Mesh 1.2Ohm Coil, which is designed to\n        deliver consistent flavour clarity and vapour output throughout the life of the pod.\n        The mesh construction distributes e-liquid evenly across the coil surface for more\n        reliable performance compared to standard single-wire coil designs.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this pod designed for Mouth-to-Lung vaping?\u003c\/h3\u003e\n      \u003cp\u003e\n        Yes. The Hayati Pro Max Plus 6000 Prefilled Pod uses a Mouth-to-Lung (MTL) draw style.\n        This means vapour is drawn into the mouth first before being inhaled into the lungs —\n        the same technique used when smoking a cigarette. It is not designed for direct lung\n        (DL) inhaling.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do I use this pod?\u003c\/h3\u003e\n      \u003cp\u003e\n        Remove the pod from its packaging and attach it to your Hayati Pro Max Plus 6000 via\n        the Magnetic Push-Fit connection. Allow 1 to 2 minutes for the coil to prime before\n        drawing. The device is inhale activated — draw on the mouthpiece at a steady, moderate\n        pace. When the pod level drops, use the included 10ml refill container to top it up\n        before replacing the pod entirely when performance declines.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat should I do if I get weak flavour or no vapour?\u003c\/h3\u003e\n      \u003cp\u003e\n        If flavour is weak, check the pod's e-liquid level and top up using the 10ml refill\n        container. Allow the coil 1 to 2 minutes to re-saturate before drawing again. If there\n        is no vapour, check that the pod is fully seated in the device and that the device is\n        adequately charged. If performance remains poor after checking both, the pod coil\n        may need replacing.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this pod refillable with my own e-liquid?\u003c\/h3\u003e\n      \u003cp\u003e\n        No. This is a pre-filled closed pod system and is not designed to be opened or filled\n        with third-party e-liquid. Once the pod's e-liquid is fully exhausted and the 10ml\n        refill container has been used, the pod unit should be replaced entirely.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this a standalone vape device?\u003c\/h3\u003e\n      \u003cp\u003e\n        No. This is a replacement pod only. It requires a Hayati Pro Max Plus 6000 device to\n        function and cannot produce vapour independently. It is not a complete vape kit and\n        does not include a battery or any device hardware.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWho is this pod best suited for?\u003c\/h3\u003e\n      \u003cp\u003e\n        This pod is best suited to adults aged 18 and over who own the Hayati Pro Max Plus\n        6000, who have chosen to vape at zero nicotine, and who prefer a bright, lively fruit\n        flavour over mint, tobacco, or heavy ice options. It is a practical and convenient\n        repeat-purchase option for existing device owners who want a cherry-led pod with a\n        sparkling finish.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does the 2ml plus 10ml format work?\u003c\/h3\u003e\n      \u003cp\u003e\n        The unit includes a 2ml pre-filled pod that is ready to attach and use immediately.\n        When the pre-filled pod runs low, the included 10ml refill container is used to top\n        it up, giving a combined total of 12ml of e-liquid per unit. This format means buyers\n        get the convenience of a ready-to-use pod alongside a substantial top-up supply, all\n        in a single purchase.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this product age restricted?\u003c\/h3\u003e\n      \u003cp\u003e\n        Yes. This is an adult product sold strictly to customers aged 18 and over. Age\n        verification is required at the point of purchase. Vapourcore operates a mandatory\n        age verification process in line with UK retail regulations, and this product will\n        not be sold to anyone under the age of 18.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n\n  \u003c\/section\u003e\n\n  \u003c!-- Compliance and Safety --\u003e\n  \u003csection class=\"product-compliance\"\u003e\n    \u003ch2\u003eCompliance and Safety Information\u003c\/h2\u003e\n    \u003cp\u003e\n      The \u003cstrong\u003eHayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry\u003c\/strong\u003e\n      is an adult product sold strictly to customers aged 18 and over. Vapourcore applies age\n      verification at the point of purchase in line with UK retail requirements. For details\n      on how age verification is managed at Vapourcore, please visit the\n      \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/age-verification\" title=\"Age verification at Vapourcore\"\u003eVapourcore age verification page\u003c\/a\u003e.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      This product contains zero nicotine (0mg). It is a product-specific replacement pod\n      that is compatible only with the Hayati Pro Max Plus 6000 device. It is not a universal\n      pod and should not be used with any other device. It is not a refillable open system\n      and is not intended for use with third-party e-liquid. The manufacturer's estimate of\n      up to 6000 puffs is indicative only and is usage dependent — actual results will vary\n      by individual. No absolute performance claims are made. This product is not presented\n      as a smoking cessation tool, and no medical or health claims are made or implied in any\n      part of this product listing.\n    \u003c\/p\u003e\n    \u003cp\u003e\n      For information about delivery options and estimated timescales, please visit\n      \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/delivery-and-shipping\" title=\"Delivery and shipping information at Vapourcore\"\u003eVapourcore's delivery and\n        shipping page\u003c\/a\u003e. For details on the returns process, please visit\n      \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/returns\" title=\"Returns policy at Vapourcore\"\u003eVapourcore's returns page\u003c\/a\u003e.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003c!-- Closing Summary --\u003e\n  \u003csection class=\"product-closing\"\u003e\n    \u003ch2\u003eClosing Summary\u003c\/h2\u003e\n    \u003cp\u003e\n      The \u003cstrong\u003eHayati Pro Max Plus 6000 Prefilled Pod Zero Nicotine Fizzy Cherry\u003c\/strong\u003e\n      is a focused, well-specified \u003cstrong\u003e0mg replacement pod\u003c\/strong\u003e for adult users who own\n      the \u003cstrong\u003eHayati Pro Max Plus 6000\u003c\/strong\u003e and want a bright, cherry-led fruit flavour\n      at zero nicotine. Compatible \u003cstrong\u003eonly with the Hayati Pro Max Plus 6000\u003c\/strong\u003e\n      device, it delivers 12ml of total e-liquid capacity across a 2ml pre-filled pod and a\n      10ml refill container, powered by an Advanced Mesh 1.2Ohm Coil through a smooth,\n      inhale-activated Mouth-to-Lung draw. Fizzy Cherry sits at the livelier end of the fruit\n      spectrum — brighter and more sparkling than a flat cherry option, sweeter than mint, and\n      entirely free from ice or cooling. For adults choosing a straightforward, cherry-forward\n      replacement pod within the Hayati Pro Max Plus 6000 system, this is a commercially clear\n      and convenient option available now at Vapourcore.\n    \u003c\/p\u003e\n  \u003c\/section\u003e\n\n\u003c\/article\u003e","brand":"Hayati","offers":[{"title":"0mg","offer_id":57328813080959,"sku":"HayatiProMaxPlus6000PrefilledPodZeroNicotineFizzyCherry","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3426\/9997\/files\/Fizzy_Cherry_Hayati_Pro_Max_Plus_6000_Prefilled_Pod_Zero_Nicotine.png?v=1776250477","url":"https:\/\/www.vapourcore.com\/products\/hayati-pro-max-plus-6000-prefilled-pod-zero-nicotine-fizzy-cherry","provider":"Vapourcore®","version":"1.0","type":"link"}