{"product_id":"geekvape-sonder-q3-pod-vape-kit","title":"GeekVape Sonder Q3 Pod Vape Kit","description":"\u003ch1\u003eGeekVape Sonder Q3 Pod Vape Kit\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeekVape Sonder Q3 Pod Vape Kit\u003c\/strong\u003e is a refillable pod kit built around a 1750mAh battery, 30W output, and a stepless sliding airflow — a continuous slider from tight MTL to open RDL with no fixed click positions. Draw-activated, no buttons. Works with GeekVape Q Series pods in 0.6Ω, 0.8Ω, and 1.2Ω resistances; 0.8Ω pre-installed. Nine colours: Beat Black, Beat Navy, Beat Silver, Groove Purple, Groove Teal, Groove Yellow, Vibe Blue, Vibe Orange, Vibe Red. UK TPD compliant, MHRA registered. Part of the \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/geekvape\"\u003eGeekVape range\u003c\/a\u003e at Vapourcore.\u003c\/p\u003e\n\u003cp\u003e18+ only. This product contains nicotine, which is a highly addictive substance.\u003c\/p\u003e\n\u003ch2\u003e1750mAh Battery — A Full Day on a Single Charge\u003c\/h2\u003e\n\u003cp\u003eAt 1750mAh, the Sonder Q3 carries a notably large battery for a pod kit in this class — many comparable pod kits are built around smaller capacities, making the Q3 one of the better-specified options for battery life at this price point. At typical daily use, most vapers will get a full day on a single charge. Charging is via USB-C fast charging; a cable is not included, so a standard USB-C cable is needed. Battery status shows on the RGB LED: Green above 60%, Blue 30–60%, Red below 30%. No screen required.\u003c\/p\u003e\n\u003ch2\u003eStepless Sliding Airflow — Not Just Adjustable\u003c\/h2\u003e\n\u003cp\u003eMany pod kits offer two or three fixed airflow positions. The Sonder Q3 uses a stepless slider — no set positions, continuous adjustment across the full range from tight MTL to open RDL. Set it once to exactly the draw resistance preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMTL\u003c\/strong\u003e (mouth-to-lung) is a tight, cigarette-like draw suited to 20mg nicotine salts and the 1.2Ω pod. \u003cstrong\u003eRDL\u003c\/strong\u003e (restricted direct-lung) is looser with more vapour, suited to 3–6mg freebase and the 0.6Ω or 0.8Ω pod.\u003c\/p\u003e\n\u003ch2\u003eDraw-Activated — No Buttons, No Settings\u003c\/h2\u003e\n\u003cp\u003eInhale to fire — nothing to press, no wattage to set, no menus. The only control is the stepless airflow slider. For ex-smokers or anyone switching from a disposable, the Q3 is straightforward: fill the pod, set the airflow, vape. Browse the full range of \u003ca href=\"https:\/\/www.vapourcore.com\/collections\/refillable-pod-vape-kits\"\u003erefillable pod vape kits\u003c\/a\u003e at Vapourcore.\u003c\/p\u003e\n\u003ch2\u003eGeekVape Q Series Pods — Which to Choose\u003c\/h2\u003e\n\u003cp\u003eGeekVape Q pods fit the Sonder Q, Q2, and Q3 — all three share the same pod format, so any Q pods already owned carry over. Three resistances:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω\u003c\/strong\u003e — RDL. Looser draw, more vapour. 3–6mg freebase, 50\/50 or 60\/40–70\/30 VG\/PG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω (pre-installed)\u003c\/strong\u003e — MTL\/RDL crossover. The most versatile. Suits 50\/50 freebase at 3–6mg or nic salt at 10–20mg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω\u003c\/strong\u003e — Tight MTL, closest to a cigarette draw. 20mg nicotine salt, 50\/50 VG\/PG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.vapourcore.com\/products\/geekvape-q-refillable-pods-3-pack\"\u003eGeekVape Q replacement pods\u003c\/a\u003e are available as 3-packs at Vapourcore.\u003c\/p\u003e\n\u003ch2\u003eGeekVape Sonder Q3 Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1750mAh built-in rechargeable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCharging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB-C fast charging (cable not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePod capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2ml — top-fill (UK\/TPD version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStepless sliding — continuous MTL to RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED indicator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRGB: Green (\u0026gt;60%), Blue (30–60%), Red (\u0026lt;30%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eActivation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDraw-activated — no buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePod compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGeekVape Q Series (0.6Ω, 0.8Ω, 1.2Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePod included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1x Q pod, 0.8Ω, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBeat Black, Beat Navy, Beat Silver, Groove Purple, Groove Teal, Groove Yellow, Vibe Blue, Vibe Orange, Vibe Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTPD compliant — UK MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich E-Liquid Works Best?\u003c\/h2\u003e\n\u003cp\u003eThe right choice depends on the Q pod resistance fitted.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePod\u003c\/th\u003e\n\u003cth\u003eRecommended E-Liquid\u003c\/th\u003e\n\u003cth\u003eDraw Style\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.6Ω\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3–6mg freebase, 50\/50 or 60\/40–70\/30\u003c\/td\u003e\n\u003ctd\u003eRDL — looser draw, more vapour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.8Ω (included)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase 3–6mg or nic salt 10–20mg\u003c\/td\u003e\n\u003ctd\u003eMTL\/RDL crossover — widest compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.2Ω\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20mg nicotine salt, 50\/50\u003c\/td\u003e\n\u003ctd\u003eTight MTL — closest to cigarette draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eGeekVape Sonder Q3 vs Q2 — Is the Upgrade Worth It?\u003c\/h2\u003e\n\u003cp\u003eThe Q3 upgrades three specifications meaningfully from the Q2.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eSonder Q2\u003c\/th\u003e\n\u003cth\u003eSonder Q3\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1350mAh\u003c\/td\u003e\n\u003ctd\u003e1750mAh (+30%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard adjustable\u003c\/td\u003e\n\u003ctd\u003eStepless sliding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePod compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eQ Series\u003c\/td\u003e\n\u003ctd\u003eQ Series (same pods)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll Q pods already owned carry over to the Q3 unchanged. The 30W output and stepless airflow precision are the two reasons to choose the Q3 over the Q2.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x GeekVape Sonder Q3 device\u003c\/li\u003e\n\u003cli\u003e1x GeekVape Q pod (0.8Ω, pre-installed)\u003c\/li\u003e\n\u003cli\u003e1x user manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C cable not included\u003c\/strong\u003e — a standard USB-C cable is required for charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Set Up Your GeekVape Sonder Q3\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge\u003c\/strong\u003e — connect via USB-C before first use (cable not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill\u003c\/strong\u003e — open the top-fill port, add your e-liquid, close the port securely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat\u003c\/strong\u003e — click the Q pod firmly into the device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime\u003c\/strong\u003e — wait 5 minutes for the coil to saturate before the first draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust and vape\u003c\/strong\u003e — set the stepless airflow slider and inhale to activate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor delivery options visit \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/delivery-and-shipping\"\u003eDelivery \u0026amp; Shipping\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the stepless airflow on the GeekVape Sonder Q3?\u003c\/h3\u003e\n\u003cp\u003eStepless airflow means the Sonder Q3’s slider moves continuously, not between fixed click positions. Many pod kits offer two or three set positions. The Q3 gives continuous adjustment from tight MTL to fully open RDL — allowing the vaper to dial in exactly the draw resistance they want rather than selecting from a limited number of preset options. The term “stepless” is GeekVape’s own description of this mechanism.\u003c\/p\u003e\n\u003ch3\u003eWhat pods are compatible with the GeekVape Sonder Q3?\u003c\/h3\u003e\n\u003cp\u003eThe Sonder Q3 takes GeekVape Q Series Pod Cartridges — the same format used by the Sonder Q and Sonder Q2, so pods already owned for either device work in the Q3. Three resistances: 0.6Ω (RDL), 0.8Ω (MTL\/RDL crossover, pre-installed in this kit), and 1.2Ω (tight MTL). Q pods are sold as 3-packs at Vapourcore.\u003c\/p\u003e\n\u003ch3\u003eWhat e-liquid should I use in the GeekVape Sonder Q3?\u003c\/h3\u003e\n\u003cp\u003eThe right e-liquid depends on the Q pod fitted. The 0.8Ω (included) suits 50\/50 freebase at 3–6mg or nicotine salts at 10–20mg. The 0.6Ω suits freebase in looser 50\/50–70\/30 blends. The 1.2Ω suits 20mg nicotine salt for tight MTL. A 50\/50 VG\/PG ratio works across all three resistances.\u003c\/p\u003e\n\u003ch3\u003eHow long does the 1750mAh battery last?\u003c\/h3\u003e\n\u003cp\u003eAt typical daily use, most vapers get a full day from the Sonder Q3’s 1750mAh battery. At 1750mAh, it is larger than many pod kits in the same class, which often carry between 900mAh and 1600mAh. Actual battery life varies with draw frequency and airflow setting. The RGB LED shows status at a glance — Green above 60%, Blue 30–60%, Red below 30%.\u003c\/p\u003e\n\u003ch3\u003eIs there a button on the GeekVape Sonder Q3?\u003c\/h3\u003e\n\u003cp\u003eNo — the Sonder Q3 is entirely draw-activated. Inhale to fire; nothing to press, no wattage to navigate, no modes. The only control is the stepless airflow slider. This makes it a straightforward option for ex-smokers or vapers moving from disposables who want a refillable kit without the complexity of a button-operated device.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy the GeekVape Sonder Q3 in the UK?\u003c\/h3\u003e\n\u003cp\u003eThe GeekVape Sonder Q3 Pod Vape Kit is available at Vapourcore, a UK-based vape retailer. Nine colour options — Beat Black, Beat Navy, Beat Silver, Groove Purple, Groove Teal, Groove Yellow, Vibe Blue, Vibe Orange, and Vibe Red. TPD compliant, MHRA registered. Age verification required. Sold strictly to adults aged 18 and over.\u003c\/p\u003e\n\u003ch2\u003eImportant Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUK TPD compliant\u003c\/strong\u003e — MHRA registered: GeekVape Electronic Cigarettes (UK) Limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable device\u003c\/strong\u003e — no nicotine e-liquid included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible pods:\u003c\/strong\u003e GeekVape Q Series only (0.6Ω, 0.8Ω, 1.2Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C charging\u003c\/strong\u003e — cable not included; use a standard USB-C cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18+ only.\u003c\/strong\u003e Contains nicotine, a highly addictive substance. Not for non-smokers. If you have a medical condition or are taking medication, seek advice from a healthcare professional before use.\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children and pets.\u003c\/li\u003e\n\u003cli\u003eDo not leave charging unattended overnight.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"https:\/\/www.vapourcore.com\/pages\/returns\"\u003eReturns\u003c\/a\u003e policy for eligibility.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"Beat Black","offer_id":57703630930303,"sku":"GeekVapeSonderQ3PodVapeKit","price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Beat Navy","offer_id":57724566995327,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Beat Silver","offer_id":57724567028095,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Groove Purple","offer_id":57724567060863,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Groove Teal","offer_id":57724567093631,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Groove Yellow","offer_id":57724567126399,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Vibe Blue","offer_id":57724567159167,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Vibe Orange","offer_id":57724567191935,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":false},{"title":"Vibe Red","offer_id":57724567224703,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3426\/9997\/files\/Geekvape_Sonder_Q3_Vape_Kit_Beat_Black.png?v=1780851340","url":"https:\/\/www.vapourcore.com\/products\/geekvape-sonder-q3-pod-vape-kit","provider":"Vapourcore®","version":"1.0","type":"link"}